Here is the error log from Nero if this helps:
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 5/31/2004 5:40:20 PM
Nero Version: 5.5.9.9
Recorder: <CREATIVE CD-RW RW6424E> Version: 1.30 - HA 1 TA 1 - 5.5.9.9
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <E-IDE Creative CD4830E>Version: U20C - HA 1 TA 0 - 5.5.9.9
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IBM-DTLA-307045 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : E-IDE Creative CD4830E atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : CREATIVE CD-RW RW6424E atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 657MB (673264kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
31.5.2004
CueSheet
5:45:33 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
5:45:33 PM #2 Text 0 File Writer.cpp, Line 134
Writer CREATIVE CD-RW RW6424E running
5:45:33 PM #3 Text 0 File Burncd.cpp, Line 3542
Turn on Track-At-Once, using CD-R/RW media
5:45:33 PM #4 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (original item values)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original CD pos #0 + 319711 (319711) = #319711/71:2.61
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
5:45:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 319710 (71:04.60)
5:45:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 204
Write in overburning mode: FALSE
5:45:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 1403
Recorder: CREATIVE CD-RW RW6424E;
CDRW code: 00 97 18 06; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:45:34 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 815
Prepare recorder CREATIVE CD-RW RW6424E for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 655075328
5:45:34 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 843
Removed 2 run-out blocks from end of track 1.
5:45:34 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original CD pos #0 + 319711 (319711) = #319711/71:2.61
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 319709 blocks [CREATIVE CD-RW RW6424E ]
--------------------------------------------------------------
5:45:34 PM #11 Phase 32 File dlgbrnst.cpp, Line 1566
Simulation started at 6x (900 KB/s)
5:45:34 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1947
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0
5:48:07 PM #13 SCSI -1135 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02910000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x07 0xBE 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x01 0x05 0x39 0x0C
0x00 0x00 0x00 0x00 0x0C 0x00
5:48:07 PM #14 MMC -1135 File Writer.cpp, Line 335
Write error
5:48:07 PM #15 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
5:48:07 PM #16 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
5:48:15 PM #17 CDR -201 File WriterStatus.cpp, Line 147
Invalid write state
5:48:15 PM #18 TRANSFER -18 File WriterStatus.cpp, Line 147
Could not perform EndTrack
5:48:17 PM #19 Phase 34 File dlgbrnst.cpp, Line 1566
Simulation failed at 6x (900 KB/s)
5:48:17 PM #20 Text 0 File Scsicmd.cpp, Line 395
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 5:27:50 AM (Adapter driver for rec)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 5:27:50 AM (Adapter driver for src)