Tech Support Forums - TechIMO.com - View Single Post - DVD-RW drive wont recognise DVD+R Disks

Postal Dude · March 21st, 2006, 02:27 PM

Iv got a BTC combo drive installed. Never had any problems with it until just. Bought some DVD+R media for it to do some backups of stuff and nothin i sem to do can get it to regognise the disks. it jus spits them back out again and says no disk inserted or disk error. Iv tried this on 5 dvds from the spindle so far and its really annoying. Burned my last 2 dvd's of different brands a couple of days ago with no problem. These ones jus dont seem to want to work. Tried updating the internal firmware but it doesnt want to do that and there are many threads on this drive not allowing a firmware update. Anyone got any ideas?

Its a BTC DVDRW-IDE1004

Thanks in advance

March 21st, 2006, 02:27 PM	#1 (permalink)
Postal Dude Senior Member Join Date: Oct 2004 Location: Birmingham UK Posts: 522	DVD-RW drive wont recognise DVD+R Disks Iv got a BTC combo drive installed. Never had any problems with it until just. Bought some DVD+R media for it to do some backups of stuff and nothin i sem to do can get it to regognise the disks. it jus spits them back out again and says no disk inserted or disk error. Iv tried this on 5 dvds from the spindle so far and its really annoying. Burned my last 2 dvd's of different brands a couple of days ago with no problem. These ones jus dont seem to want to work. Tried updating the internal firmware but it doesnt want to do that and there are many threads on this drive not allowing a firmware update. Anyone got any ideas? Its a BTC DVDRW-IDE1004 Thanks in advance __________________ Opteron 146 @ 2.6Ghz Freezer64 1024mb DDR500 RAM 3-4-4-8 Leadtek 7800GT 256Mb @ 450/1100 (515/1220 MSF) DFI NF4 SLI-D 623-3