Tech Support Forums - TechIMO.com - View Single Post

Tomteriffic · November 15th, 2007, 10:21 PM

OK, I haven't done this in just long enough that I've forgotten how to do it.

I've got a SCSI HDD on an Adaptec 2940 card, running in an old Win 98 box as a test mule. I just want to partition and format the thing to see if it's any good, still works, etc. Then maybe I'll put it to work.

Can I just boot from the boot disk? I forget if that disk will find a SCSI drive if you want to partition/format it.

November 15th, 2007, 10:21 PM	#1 (permalink)
Tomteriffic Ultimate Member Join Date: Oct 2001 Location: Ohio (transplanted f Posts: 3,110	Partition/Format SCSI drive in Win 98? OK, I haven't done this in just long enough that I've forgotten how to do it. I've got a SCSI HDD on an Adaptec 2940 card, running in an old Win 98 box as a test mule. I just want to partition and format the thing to see if it's any good, still works, etc. Then maybe I'll put it to work. Can I just boot from the boot disk? I forget if that disk will find a SCSI drive if you want to partition/format it. __________________ There's only two things in life. But I forget what they are.