February 17th, 2008, 09:50 PM
|
#7 (permalink)
|
| \m/(°-°)\m/
Join Date: Feb 2007 Location: In my room
Posts: 12,765
|
Speedstep basically turns down your CPU when the system isn't under load. Like instead of running @2.4Ghz or whatever it is stock, it will turn it down to like 1.5Ghz or so, to kill heat and power consumption.
You can have it off or on, I personally have it shut off. It messes with overclocks. Quote: |
Advanced: Performance Application support ON or OFF I highlighted the on option
|
Quote: |
Memory CMD Rate: Auto, 1T, or 2T Auto is highlighted, After reading your post I changed it to 1T and ended up resetting my CMOS. Still picks up my ram at 800Mhz
|
You need to leave that at 2T. There is no way your RAM will run 1T @800Mhz.
Quote: |
C1E Support: On or OFF mines on
|
OFF
Quote: |
EPP/SLI: on or off --- I set this on from off it sounded good when i read it
|
On
Quote: |
HDD Accoustic Mode: Bypass,Quiet, Suggested, or performance, Mines on bypass
|
Basically, set it to performance, or leave it at bypass. |
|  |