January 14th, 2009, 08:12 AM
|
#4 (permalink)
|
| I do Ouchy-Bleedy.
Join Date: Apr 2002 Location: Albany, Ga.
Posts: 10,646
|
The 2nd question: Quote:
Formica can be coated with many paints or clear finishes as long as it is absolutely clean and is very slightly sanded... 220 grit paper would be the roughest that should be used.
Since you want to maintain the appearance but just lower the gloss, you could try a water-based polyacrylic coating. This is a durable, abrasion resistant product that should serve your purposes. Minwax is one manufacturer of this product. Apply it with a foam brush or lint-free roller... very lightly! Multiple coats are preferable to a single heavy coat. This product can also be sprayed if you have access to the proper equipment. For a small area, though, spraying is unnecessary to obtain a smooth finish.
|
__________________
They say technology slows down for no one. I know it outruns my wallet. I figure its because my wallet isn't light enough yet.
|
|  |