Tech Support Forums - TechIMO.com - View Single Post - how to display mac-port table in 3com switch?

map7000 · March 24th, 2009, 07:50 AM

You should be at privilege level 3 to use this command
Try
<#>super 3
<#>display mac-address
2 Boog400 It's CISCO command. It would not work on 3Com

March 24th, 2009, 07:50 AM	#3 (permalink)
map7000 Junior Member Join Date: Mar 2009 Location: Moscow Posts: 1	You should be at privilege level 3 to use this command Try <#>super 3 <#>display mac-address 2 Boog400 It's CISCO command. It would not work on 3Com Last edited by map7000 : March 24th, 2009 at 07:56 AM.