Tech Support Forums - TechIMO.com - View Single Post - bluescreen, CCC- and other troubles

troublekram · July 2nd, 2009, 03:16 PM

what do you mean? Its clockspeed?
Btw, I also did a ram-test in that series of troubles, ran it for several hours without a single error...
But that was longer ago (as said, the problem consists since about one year by now...)
I'll have to restart the computer to get to the bios. I'll edit this post with the info asap

Edit: Ok, just dld siw...
there it says:

Maximum Capacity: 4096 MB
Max Memory Module Size 1024 MB
Memory slots: 2
Error Correction: None
DRAM Freq: 200MHz
Mem Timings: 3-3-3-8 (CL-RCD-RP-RAS)

Slot 1:

Kingston K 6637A532
Capacity: 1024 MB
Memory Type DDR (PC3200)
200 MHz with timing 3-3-3-8-0 at 2.5 volt (CL-RCD-RP-RAS-RC)
Data Width: 64bit
neither EPP SPD nor XMP SPD -support

Slot2:

Samsung M3 68L3223FTN-CCC F1055733
Capacity: 256 MB
Mem Type DDR (PC3200)
Speed: 200 MHz with 3-3-3-8-0 timing at 2.5V (CL-RCD-RP-RAS-RC)
Data Width 64 bits
neither EPP SPD nor XMP SPD -support

that's all the info I get there...

July 2nd, 2009, 03:16 PM	#3 (permalink)
troublekram Junior Member Join Date: Jul 2009 Posts: 4	what do you mean? Its clockspeed? Btw, I also did a ram-test in that series of troubles, ran it for several hours without a single error... But that was longer ago (as said, the problem consists since about one year by now...) I'll have to restart the computer to get to the bios. I'll edit this post with the info asap Edit: Ok, just dld siw... there it says: Maximum Capacity: 4096 MB Max Memory Module Size 1024 MB Memory slots: 2 Error Correction: None DRAM Freq: 200MHz Mem Timings: 3-3-3-8 (CL-RCD-RP-RAS) Slot 1: Kingston K 6637A532 Capacity: 1024 MB Memory Type DDR (PC3200) 200 MHz with timing 3-3-3-8-0 at 2.5 volt (CL-RCD-RP-RAS-RC) Data Width: 64bit neither EPP SPD nor XMP SPD -support Slot2: Samsung M3 68L3223FTN-CCC F1055733 Capacity: 256 MB Mem Type DDR (PC3200) Speed: 200 MHz with 3-3-3-8-0 timing at 2.5V (CL-RCD-RP-RAS-RC) Data Width 64 bits neither EPP SPD nor XMP SPD -support that's all the info I get there... Last edited by troublekram : July 2nd, 2009 at 03:31 PM.