Tech Support Forums - TechIMO.com - View Single Post

cdz25 · May 4th, 2003, 05:14 PM

I'm installing memory on a clients computer, the system has a amd k6-2 processor,(supports 100mhz) although setup shows its running 66mhz bus speed, I need to know if i need to change the voltage on the dimm jumpers, the system has a 64mb dimm in slot 0 but when i installed the (PC-100) 128 mb dimm into slot 1(or)0 the system doesnt boot and nothing happens, also setup has a setting for you to change dram configuration but only for speed timing and such but the system doesnt even recognize the ram.There is no name or markings on the mbd , But I have the book the cover says PC-100 main board users manual, also the computer is in the AT configuration, and the dimm jumpers is set at 3.3 volts. What could be the problem.

May 4th, 2003, 05:14 PM	#1 (permalink)
cdz25 Member Join Date: Sep 2002 Location: northeast ohio Posts: 47	could it be the voltage jumpers I'm installing memory on a clients computer, the system has a amd k6-2 processor,(supports 100mhz) although setup shows its running 66mhz bus speed, I need to know if i need to change the voltage on the dimm jumpers, the system has a 64mb dimm in slot 0 but when i installed the (PC-100) 128 mb dimm into slot 1(or)0 the system doesnt boot and nothing happens, also setup has a setting for you to change dram configuration but only for speed timing and such but the system doesnt even recognize the ram.There is no name or markings on the mbd , But I have the book the cover says PC-100 main board users manual, also the computer is in the AT configuration, and the dimm jumpers is set at 3.3 volts. What could be the problem.