Tech Support Forums - TechIMO.com - View Single Post

**EvilRick** · July 10th, 2003, 05:30 PM

There might be a setting for a delay when accessing IDE devices and such. Memory timing set too slow.

A good rule of thumb is to ALWAYS reset the CMOS on a new build, then go into the BIOS first thing and set it to defualts.

After making sure it at least boots, then go in and tweak the Hell out of it.

July 10th, 2003, 05:30 PM	#2 (permalink)
EvilRick Mean Moderator Join Date: Oct 2001 Location: N of Music City, USA Posts: 7,791	There might be a setting for a delay when accessing IDE devices and such. Memory timing set too slow. A good rule of thumb is to ALWAYS reset the CMOS on a new build, then go into the BIOS first thing and set it to defualts. After making sure it at least boots, then go in and tweak the Hell out of it.