Tech Support Forums - TechIMO.com - View Single Post

PonzSpyder · January 1st, 2002, 02:09 PM

Try going into Tools/Options and then check out the file location tab. There should be a location for "Startup", thats where you need to put that normal.dot file

EDIT: Oops, forgot about the other question...

Did you look in Tools/Envelopes and Labels? Click on the Options Button and than look at the settings under the "Printing Options" tab.

hope this helps and good luck

January 1st, 2002, 02:09 PM	#5 (permalink)
PonzSpyder Senior Member Join Date: Oct 2001 Location: New Jersey Posts: 707	Try going into Tools/Options and then check out the file location tab. There should be a location for "Startup", thats where you need to put that normal.dot file EDIT: Oops, forgot about the other question... Did you look in Tools/Envelopes and Labels? Click on the Options Button and than look at the settings under the "Printing Options" tab. hope this helps and good luck __________________ "It's only after we've lost everything that we're free to do anything" www.rjponzio.com Last edited by PonzSpyder : January 1st, 2002 at 02:13 PM.