Tech Support Forums - TechIMO.com - View Single Post

grebinrm · October 13th, 2003, 02:25 AM

I have a Digital 5000 series PC w/ 266mHz and 256mb RAM. I was running (2) SCSI hard drives and and IDE CD Rom. I attached and IDE hard drive as a slave to the IDE (primary) port to format it for another PC (which failed). After removing the IDE hard drive the Windows 2000 Pro OS failed. I fully reinstalled and for some reason the PC will not recognize the 2nd SCSI hard drive. This is driving my crazy and I know my way around PC's. It shows up during the boot sequence and as an item in the System properties but is not recognized as a valid drive in My Computer, Explorer etc. Any ideas people?

Thanks,

Rich
holgarth@hotmail.com

October 13th, 2003, 02:25 AM	#1 (permalink)
grebinrm Junior Member Join Date: Oct 2003 Posts: 7	SCSI Hard Drive Problem I have a Digital 5000 series PC w/ 266mHz and 256mb RAM. I was running (2) SCSI hard drives and and IDE CD Rom. I attached and IDE hard drive as a slave to the IDE (primary) port to format it for another PC (which failed). After removing the IDE hard drive the Windows 2000 Pro OS failed. I fully reinstalled and for some reason the PC will not recognize the 2nd SCSI hard drive. This is driving my crazy and I know my way around PC's. It shows up during the boot sequence and as an item in the System properties but is not recognized as a valid drive in My Computer, Explorer etc. Any ideas people? Thanks, Rich holgarth@hotmail.com