GroundZero3

This kind of baffles me, there is no default screen lock for the Snow Leopard desktop which seems a bit odd to me. Either way, to enable it go into /Applications/Utilities/ and click on keychain access. Under the keychain access menu, click preferences, then click show status in menu bar. A little lock will appear in the menu bar. You can now click it and lock the screen.

Hope that helps others!

http://www.techimo.com/forum/applica...0-sp2-out.html


As I noted in this thread, I updated all my servers yesterday without a problem. It will make you run the wizard again and it can be slow!

Design Guide for Cisco Unity Virtualization - Virtualizing Cisco Unity Messaging on VMware ESX* [Cisco Unity] - Cisco Systems

Our primary server will be a physical box running Unity 7.xxx and our back up server will be a vm. Should be interesting to see how well this works out!

I upgraded our Cisco WLC 4404 to 6.0.182.0 tonight and I came up with a serious issue

All my remote access points are showing up as offline (and yes they are online as I can see them through show cdp neighbors and ping their ip addresses). They don't even show up in the controller as connected. However the access points on the same subnet as the controller connected just fine. Apparently this seems to be a gateway issue on the controller? I can ping the management address on...

For the last couple of days ive been fighting clients not reporting their update status to WSUS. After some digging around and playing with the WSUS Client Diagnostic Tool. I think I finally figured it out.

All my clients were showing up with this error:

I found this fix that cleared it up. Supposedly it has something to do with SP1 breaking...