Problem with ECCp

hav0c · April 5th, 2002, 06:27 PM

I'm having trouble compiling the newest Statsaholic version of ECCp on my Linux box(Mandrake 8.2). I type make x86lCL and get the following error "make: *** No rule to make target `asm/x86_att/inv_p109.S', needed by `eccp109ls'. Stop."

Anyone know what might be the cause of this?

Thanks

HotRod9mm · April 6th, 2002, 01:47 AM

Sorry I can't help. I do know several here run Linux and will be able to help. You could try PM'ing "Spook Eddy" as I know he is up on that Linux....

<edit for a brain fa*t> Do a search in this forum, if I recall someone posted how to set up Linux a while back....

KenKun · April 6th, 2002, 02:34 AM

Me too .. sorry, but i can't help in linux ..
I just found a thread that might help

http://www.techimo.com/forum/t16929.html

Good Luck

Daft_Ghosty · April 6th, 2002, 08:03 AM

MereMortal should know.. over at TNT-EXDC.. KnenKun posted a link that should take u in the right direction.. if u still can't get it.. then I would say see if you can get in touch with MereMortal..

Thud · April 6th, 2002, 08:22 AM

Quote:

MereMortal should know.. over at TNT-EXDC

Actually, he's at Anandtech.

I think we have a couple of folks (Skuz and EvilRick, maybe?) who run it in Linux. Hopefully they'll be along soon.

FYI: You'd probably have better luck if you indicated it was a Linux related question in the subject.

Best of luck....I'm sure someone will come along before too long! I know squat about Linux.

MereMortal · April 6th, 2002, 12:32 PM

I'll download the statsaholic source and have a look at it. I don't know what extras Virus added in, but if you can do without those, you can download myclient.

If Ken_g6's source was just 'stuck in' there, then I have a good idea what's wrong. I had to make some minor changes to get client to compile on linux.

Anyway, I'll be back later....

eagle1 · April 6th, 2002, 12:43 PM

I run the linux client but I have never used the source and compiled it to get the executable, I always use the binary!

Praetorian · April 6th, 2002, 02:24 PM

Hmm....I just downloaded the Enhanced Linux Client (athlon) from Statsaholic.com and it does not require and compling. In a terminal type tar -xzvf eccp109-xxx-_xx_xx.tar.gz. Then run it untared file buy typging (heres a space) ./eccp109_k If I'm totaly wrong here show me what version you got so I can help ya out more.

MereMortal · April 6th, 2002, 03:53 PM

Praetorian, I believe that hav0c is trying to build with the latest source code on statsaholic, not trying to get the last linux binary version posted.

I looked at the source code, and here are a few comments:

1) That source code does not have the latest ASM code from Ken_g6. The version I posted does.

2) The difficulties you are running into while trying to compile are what I expected. The files in asm/x86_att don't match with those in the Makefile. It is a problem with the case of the extensions. To make everything consistent, I use the '.S' extension for the assembly files.

Another problem I ran into is that the source uses CLK_TCK to determine iterations per second. I found that in my linux system that value was 1000x too low, so I changed back to the way that Chris had done it before.

3) There are some extras that Virus put in like running in quiet mode, setting the send interval, run time, etc. If you really need these features, then you will have to add them yourself. The easiest thing to try would be to use the source that I modified and put in the statsaholic inter/x86lCL/eccp109-x86lCL.c. I haven't tried this, and probably won't since I am packing for a move across the country.

So, there you have it.

hav0c · April 6th, 2002, 07:04 PM

Thanks Meremortal