Thread: FolderChat /6/9/ it's alive
June 9th, 2008, 06:09 AM #1
FolderChat /6/9/ it's alive
It's alive and it worked it be a miracle,
vista come back from sleep mode and didn't BSOD, good thing to I was getting some ideas about what to do, and vista was not going to like it,
well must go check on coffee, yum yum cooofffffeeee! wooooooi'm folding for techimo!! what are you doing?
June 9th, 2008, 06:42 AM #2
Glad to hear you got the Vista somewhat figured out. Also good to know that all you have to do is threaten Vista, and it might start working..
Rain here today, so probably gonna go back to bed for a bit...
June 9th, 2008, 07:50 AM #3
Just a reminder: we've retired GPU1 today. As of 9:30am pacific time, new assigns for the GPU1 client will go to 0.0.0.0. We will keep the data server up for a few more days to collect old WU's, but we will repurpose that server in about a week (the deadline time on the GPU1 WU's was 6 days).
I'd like to personally thank all the GPU1 folders, whose work has lead to the GPU2 clients, for both ATI and NVIDIA. Just as we turn the page on GPU1, we are nearing our open beta release for the GPU2/NVIDIA client. If all goes well, we hope to have that available in a week. I'll give an update if it looks like it will be delayed more than a week.
CUDA-Enabled GPU Products - NVIDIA
June 9th, 2008, 07:59 AM #4Team Stats- 6/09
Team Rank: 309
-TechIMO's Top 20-
(username/24 hour average/total points)
1 engracio 9,657-- 1,151,414
2 mrniceguytech 5,193-- 429,020
3 Karmakiller 3,427 -- 191,169
4 no1_vern 2,420 -- 1,008,214
5 2monsters 1,719-- 147,944
6 CoonDawg90 799-- 38,021
7 kyle 625 -- 132,410
8 PS3 571 -- 270,673
9 ihatereading369 459-- 159,466
10 Jynxedu 414 -- 51,688
11 emeraude63 393-- 9,397
12 cmptrgydv 247 -- 84,780
13 vikeor 226 -- 18,844
14 cunokyle 205-- 27,105
15 Chuckiechan 122-- 183,962
16 alhirzel 117 -- 13,466
17 williamhelmick 68-- 236,459
18 nunyadam 65 -- 30,426
19 butch81385 65-- 5,209
20 bweir_BBC 63 --3,706
June 9th, 2008, 09:15 AM #5
June 9th, 2008, 09:17 AM #6
No money being had here today either.
Unless I get unlazy and load up XP on this laptop, then I might make a 6 pack.
And from what I've read, the new GPU client (dubbed GPU2) is going to be faster then the PS3 by a good margin. And also I read in a post that steam processors will help greatly. So it sounds like the more SP's, the more folding.
June 9th, 2008, 11:27 AM #7
Im almost there on getting Kubuntu on. I am sure that it is the ide-piix module! KK, if I cant get the Kubuntu to work . . . what should I do to get up on Gentoo? I have always wanted to try Gentoo . . .
June 9th, 2008, 11:30 AM #8
June 9th, 2008, 01:20 PM #9
June 9th, 2008, 02:00 PM #10
June 9th, 2008, 06:04 PM #11
June 9th, 2008, 06:58 PM #12
nunya whats you doing,i'm folding for techimo!! what are you doing?
June 9th, 2008, 07:52 PM #13
June 9th, 2008, 08:40 PM #14
June 9th, 2008, 08:41 PM #15
Ok so today i was pretty bored so i lapped the AC7Pro to a fine flat mirrored finish Temps went down across all cores 5c! Now one of these days i will get around to lapping the cpu. It also takes some skill to lap the Ac7 pita
So now i got the quadie oced again @ 2.9 folding 100% on all 4 and my highest temp is 52c, hopefully when the AS5 cures it will drop a tad more.
June 9th, 2008, 08:49 PM #16
June 9th, 2008, 08:50 PM #17
June 9th, 2008, 08:54 PM #18
I hear you on the Arctic Freezer Lapping.. Those damn push pins get in the way everytime...
But,I cheated a bit and used the edge of the desk, so 2 of the pins never made contact with the sand paper.
Anywho, I'd be swapping out the E6320 for the E7200. So there would only be a minor gain in my score.
June 9th, 2008, 09:03 PM #19
June 10th, 2008, 01:03 AM #20
- Join Date
- Oct 2001
- Uh, Central Oregon
- Blog Entries
Okay . . . Zeus just went to F@H at 1/2 power tonight . . .
Zeus is currently a 2400+ Sempron, but . . . .
Tomorrow night he gets upgraded to a Athlon 3200+
I may set up Zeus' old board . . . and if I do, it'll run F@H as well.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By dchw_dude in forum Distributed ComputingReplies: 27Last Post: April 18th, 2008, 11:29 PM
By dchw_dude in forum Distributed ComputingReplies: 14Last Post: April 17th, 2008, 12:16 AM
By Cmptr-Gy-Dv in forum Distributed ComputingReplies: 22Last Post: April 3rd, 2008, 11:39 PM
By Cmptr-Gy-Dv in forum Distributed ComputingReplies: 276Last Post: March 24th, 2008, 07:00 PM
By Makaveli in forum General Tech DiscussionReplies: 2Last Post: November 12th, 2004, 06:51 PM