New F@H Member Introductions

sharder8 · June 6th, 2009, 02:36 AM

Hey fpantovich, glad ta' see ya' back!

Harder

Nude_Lewd_Man · June 6th, 2009, 05:44 AM

Quote:

Originally Posted by cksboy15

Somethings running because my cpu is at 30% usage when I look at the task manager. I might of activated the cpu client but the icon name said gpu client.

That could be due to you having a single client, but multiple cores...

It will show the percantage as the overall, so (on a dual-core) if one core is running at full pelt but the other isn't being used by that CPU client, then it will show as using 50%...

That's why I run a client for each CPU core that the machine has... (Next up, see what I can do regarding silent installs of the GPU client - otherwise I'll only be able to add one extra client.....

Oh, and it will also depend on what you specified in the setup (-config) section of the install..............

cksboy15 · June 6th, 2009, 12:13 PM

ah didn't think of that.

Nude_Lewd_Man · June 7th, 2009, 06:16 PM

Is it working as you expected now, or are you happy with how it is...?

Networker4321 · June 7th, 2009, 09:41 PM

Oh man, hell yes. I have already completed two of the 0/1500 WU's in less than 24 hours after I got it rockin's that to you and Karma Killer,,,,,,,,,,I think.

The control panel is cool, we have moved from Team # 125 up to 123 the past couple of days.

Now, I am of the belief I can dedicate this ;ittle network of duo core to the cause. One workstation and 4 notebooks, all due core except one XP laggard and only 512 of mem.

Looking forward to seeing how my big notebook with Vista Prem and 3 GB of Ram will fold like a mad man.

Pretty cool. I really appreciate the follow up.

Networker4321

KarmaKiller · June 7th, 2009, 09:49 PM

That's awesome. I'm glad you got her going.
And IDK if your aware, but you might keep an eye on temps especially on the lappy. Folding will max out the CPU core, which will lead to the CPU running warmer then usual.
Nothing to worry about, but just make sure nothing is cooking itself.

And slow and steady is the way this team rolls. When I first started folding here I believe we were well into the 300's in rank. We've covered a lot of ground since.

Keep on folding!

Flying JJ · June 7th, 2009, 10:21 PM

Welcome Net.

Just ordered the 2nd 275, looks like the first is getting about 50k a week.
Think the 2nd will double that?

Networker4321 · June 8th, 2009, 01:02 AM

Quote:

Originally Posted by Flying JJ

Welcome Net.

Just ordered the 2nd 275, looks like the first is getting about 50k a week.
Think the 2nd will double that?

Flying JJ,

Not sure, maybe the moderators will know but I am beginning to suspect that WU's are assisnged by CPU size, number OF CPU, Mem size,,,,

My WU's come in in chunks of 1500 and I have checked every once and a while and it looks like they roll off completed in sections of like 300 until the 1500 are done.

You can then go into user and team statistics and see/monitor your process ( right click the F@H icon in the sys tray. ) I already have two completed certificates for ! workunit (220 points then the 2cd work units that gives me a cert for 450 points?

I'll bet someone more senior than I can answer better!

Glad you are folding. Team 111 is moving up in the ranks!!

Thanks,

Networker4321

Aaron_8015 · June 8th, 2009, 01:35 AM

AFAIK You will only get points for fully completed work units. You get a certain amount of points depending on the protien that has been folded, some take longer than others so they will give you more points. (Although the larger ones dont have a very good time/points ratio compared to the smaller WU's).

Also I think we should move this to the F@H thread and not bog down the new member section.

Networker4321 · July 9th, 2009, 11:33 PM

Quote:

Originally Posted by nunyadam

New to our F@H Team? post here, and tell us a little about yourself.

I used to watch the list and Welcome new members, but only a few would respond. So I'm leaving it up to You to introduce yourselves.

It doesn't have to be anything more than " Hello my name is ______ I just joined the Team" , but you can expand on that if you like.

Hello, my forum name is Networker 4321 and I started folding about 5-6 weeks ago and am already over 9K WU's. As a cancer patient (pancreatic) I hope to make a difference too and I sincerely appreciate the efforts of all in this forum. Have made some good acquantances already as well.

I am having a problem with the last two machines I tried to bring into the fold ( double entendre anyone?). The sys tray icon continues to stay at "loading" and every 4 or 5 hours the configure block pops back open. Nothing any different than the first 4 machines?

Suggestions anyone? I have already tried uninstall and re-install several times.

Glad to be here and again, Thank You.