[F@H SPAM 28 JUN 09] Today's the day...

Nude_Lewd_Man · June 28th, 2009, 08:12 AM

I think it is prolly my turn to kick things off...so here goes.....

Top 20 Producers
Rank Team UserName Points 24hr Avg Points Total
1 sharder8 50,120 5,934,735
2 Nude_Lewd_Man 35,609 516,848
3 no1_vern 35,336 6,247,873
4 FlyingJJ 24,846 394,014
5 2monsters 24,372 4,543,095
6 engracio 23,122 8,934,028
7 Karmakiller 12,076 3,573,361
8 Bizkitkid2001 10,200 1,356,572
9 Xam.Relseor 6,087 665,301
10 _Nemo 4,659 379,702
11 butch81385 4,235 470,340
12 Creatures 3,828 248,853
13 Batmeat 3,258 913,745
14 ShyguyXPC 3,144 565,385
15 MervTeck 2,845 894,944
16 TheReaperWaits 2,176 431,463
17 RicheemXX 1,961 299,199
18 Reveille 1,826 348,256
19 nunyadam 1,610 689,402
20 BIGDREW 538 21,659

I'm back up and above Vern again..!!

EDITED to correct formatting - it looked fine until just after I'd clicked 'Submit'...

Flying JJ · June 28th, 2009, 10:29 AM

@ Nude
Did you ever think of running all those cores full out? Say for over a weekend ( I'am assuming they are at work ). I was wondering just how many points you could do in 24 hrs @ 100%. My 1 is running @ about 75% due to heat concerns. Need to go to water cooling soon. [ insert hose squirting smiley here ].

Nude_Lewd_Man · June 28th, 2009, 11:14 AM

If I could find out about setting up a script that would enable the service/s to be restarted, then I would - same as I could set them up to run at 80+% overnight too..!

There are a couple of other computers at work that I manually pause (and resume) or change the %age (and restart the services manually) when my colleagues go out to lunch and overnight...

I've got a feeling that one of them has a quad-core PC, but I only managed to install 2 cores when I was working on it a few weeks ago... Keep meaning to find out (and install extra clients if it is) but he locks the computer and hasn't been off since I installed the first two...

Flying JJ · June 28th, 2009, 11:49 AM

Sounds like alot of work. I thought you already had done something like this. Where I worked last, the IT dept. could remotely do anything to your computer.

Nude_Lewd_Man · June 28th, 2009, 12:10 PM

I can do most things remotely, but for some reason I have been unable to find a way to get the F@H service/s to restart.

Normally, you would go into Services, find the service you want to deal with and find the EXE - by looking in the "Properties" box. Then all you have to do is write a batch file (that can be scheduled to run using the Scheduled Tasks) that starts, stops, pauses or resumes the EXE. You can write multiple commands within the same BAT file, for example:

Quote:

net stop service_name
net start service_name

I've done this for the Print Spooler for a server where they had issues every couple of hours when they were suddenly unable to print to a networked printer. I created a BAT file (stored on the desktop - just in case we need to run it as a one-off) and there's a Scheduled Task that runs every 90 minutes, which runs that BAT file. They haven't had any issues since then.

If I could get the F@H service to restart using a BAT file, then I would set it up either a second client per core and have that run at around full pelt, or create a long BAT file that amends the config file, then stops the service, followed by starting the service again - either way, I would create a task that runs the BAT file to increase my output - and another that reverses it to stop it being noticed...

KarmaKiller · June 28th, 2009, 01:25 PM

Top of the morning to ya's!

And I have that same problem when posting stats newd. Secret is paste then, then click the "go advanced" or "preview post" then it'll mess them up so you can fix them again.

Flying JJ · June 28th, 2009, 02:54 PM

Hey the Icy Diamond you guys were talking about on GPU's, what is this stuff, where do you put it and how good is it. Mine get up to the low 80's and I would really like to keep them in the low 60's. Have plenty of air in the case but card spacing is a little of an issue.

KK- hope the 300's come out like the 295 co-op w/ the hydrocopper

Aaron_8015 · June 28th, 2009, 03:07 PM

Quote:

Originally Posted by Flying JJ

Hey the Icy Diamond you guys were talking about on GPU's, what is this stuff, where do you put it and how good is it. Mine get up to the low 80's and I would really like to keep them in the low 60's. Have plenty of air in the case but card spacing is a little of an issue.

KK- hope the 300's come out like the 295 co-op w/ the hydrocopper

I can see you busting open your new 300's to apply new paste.......

KarmaKiller · June 28th, 2009, 03:28 PM

Quote:

Originally Posted by Flying JJ

Hey the Icy Diamond you guys were talking about on GPU's, what is this stuff, where do you put it and how good is it. Mine get up to the low 80's and I would really like to keep them in the low 60's. Have plenty of air in the case but card spacing is a little of an issue.

KK- hope the 300's come out like the 295 co-op w/ the hydrocopper

Innovation Cooling Compounds | Page 1 | Sort By: Product Title A-Z - FrozenCPU.com *

How good is it?

That was in a forum wide test. I think you'll get the point, but if you want more reading
IC Diamond 7 Carat Thermal Compound Test Results - Overclock.net - Overclocking.net

(and changing the TIM on GPU's is easy!

Flying JJ · June 28th, 2009, 03:37 PM

Quote:

Originally Posted by Aaron_8015

I can see you busting open your new 300's to apply new paste.......

Yes I probably would. But if they come out with the new hydro copper 300's I shouldn't need to. I want to try to get the tri-275 temps. down.

Just so you know I am trying to restrain myself until the 300's come out on a very good reccomendation.