Thread: Oh happy DC goodness!
-
August 6th, 2009, 01:00 PM #1
Oh happy DC goodness!
I don't know how many of you guys know the problems e-man has been having trying to help me with a computer that will run DC for me.
He sent me a computer (he knew my old faithful was getting tired)- but he didn't know that everything I touch usually blows up in my face.
I got the box plugged it in, it worked and I was happily crunching for oh, about a week. then it was dead. The fans spun and it lit up but didn't send a video signal to the monitor. I was particularly frustrated because I had another box that did the same thing a couple years ago and replacing the video card didn't help.
So what did E-man do? He sent me another one!!! Can you believe it? How generous is this guy? He's awesome! Unfortunately when i got it, it sounded like a box of unwrapped tools in a giant box. The video card came out and then bashed out the hard drive; it must have been like a mosh pit in there! The video card was smashed, and I figured everything else would be too beat to work.
So I put a new power supply in my trusty computer and put in a new video card from the first box that died and nothing. No big deal, and I took out the card and even put my old power supply back in and booted my old trusty computer. wah woe,,, it was no longer trusty and dead.
So today I decided to put everything back together in the shake and bake computer and success!!
Thanks eman!!! You rock!!! It's quiet, fast, and I have room to put my old hard drives in as slaves!!
I LOVE IT!!
-
August 6th, 2009, 01:21 PM #2
-
August 6th, 2009, 01:28 PM #3
The only concern I have is the cpu fan... it's leaning a bit..
(sorry for the size of this, I don't have editing software on my lappy)

that green on the bottom is the video card, I have it secured and it is not tilted...
-
August 6th, 2009, 01:31 PM #4
uh oh, you can see my old habit of using thumb screws for components..

(of course the little lever thingy was also beat to death and bent up so I couldn't depend on that and had to screw it in)
-
August 6th, 2009, 01:32 PM #5
OK, now back to my new box and get things going the way I like them;.. Honest! I won't break it...
-
August 6th, 2009, 01:41 PM #6
Core temp is installed on that box, just keep an eye on the temp. Obviouly if it is going above 72c or higher the cpu hsf should be reset.
Last edited by engracio; August 6th, 2009 at 01:44 PM.
-
August 6th, 2009, 01:51 PM #7
I looked for it and didn't see it, I'll look again when I reboot.
Hmmm there's only one IDE connection... can I string 2 hd slaves and the dvd together?
-
August 6th, 2009, 02:03 PM #8
yes that ide can take 2 ide devices, two max. also by the clock there should be a red number , doppel click on it and see what is the temp. if not a shortcut should be on the desktop.
also make sure the ide devices are either master or slave. I know I set either the dvd or ide drive as cable select. If you are adding another ide drive put it as cable select.
-
August 6th, 2009, 02:53 PM #9
Why? Why not just slave them in? I know the DVD was set to cable select and I changed it to Slave and popped in the hard drive that is also slaved...
Now you have to tell me why it only works with CS...
Because it sees the DVD player but not the hard drive...
-
August 6th, 2009, 04:16 PM #10
What I was trying to say is if one drive is set to cable select , the other one must also be cable select. If the other one is set to master, then the other one must be set to slave. I don't think they can be set as master/cable select or vice versa. I could be wrong idk.
Either way as long as both ide device is recognize, then all is good.
-
August 6th, 2009, 04:24 PM #11
I had them both set to slave.. (I don't like cs much)
Then I changed the DVD to master- no go
Then I changed the cable and viola!
Houston we have recognition..
-
August 6th, 2009, 04:43 PM #12
-
August 6th, 2009, 04:52 PM #13
Haha.. your HSF has got a gansta lean going on!

I'd just leave it how it is, those heatpipes are fragile, so if it's working, don't fix it.
Awesome you got it going though! At least you made yourself familiar with newer towers.
Q6600@4Ghz | i7 920@4.4Ghz |E6320@3.5Ghz
FAQ's ~ Team Stats
My PC
TechIMO Folding@home Team #111 - Crunching for the cure!
-
August 6th, 2009, 05:10 PM #14
Yes, my previous experience with computers was with the ones we used to crank to get started...
-
August 6th, 2009, 05:24 PM #15

"Ah damn, I just threw the starter out in my PC"

I'm done now.
Q6600@4Ghz | i7 920@4.4Ghz |E6320@3.5Ghz
FAQ's ~ Team Stats
My PC
TechIMO Folding@home Team #111 - Crunching for the cure!
-
August 6th, 2009, 06:01 PM #16
-
August 6th, 2009, 06:06 PM #17
Wondering is that the Corsair PSU in that pic?
Didn't know if you got around to using it yet or not.i7 940//Corsair H60//EVGA X58 SLI LE//6GB Corsair Vengeance 1600MHz//2x EVGA GTX 560 Ti FPB SLI//NZXT Hale82 850W//CM 690 II Advanced//Win7 64//WD 74GB V-raptor, 750GB Black, 1.5TB Green
TechIMO Folding@home Team #111 - Crunching for the cure!
-
August 6th, 2009, 06:44 PM #18
I tried it yesterday when I put a different video card in my computer and it didn't help.
I have it sitting to be repacked and sent back.
My $ has not improved at all but I expect I can send it back to you soon.
-
August 6th, 2009, 06:47 PM #19
The video is really choppy, and slow is it because of running the program on the card or perhaps another setting?
Or maybe it's my browser...
Hmmm, IE seems to work fine..(was using FF)
-
August 6th, 2009, 07:04 PM #20
the PSU isn't enough power? or something else wrong with the system?
i7 940//Corsair H60//EVGA X58 SLI LE//6GB Corsair Vengeance 1600MHz//2x EVGA GTX 560 Ti FPB SLI//NZXT Hale82 850W//CM 690 II Advanced//Win7 64//WD 74GB V-raptor, 750GB Black, 1.5TB Green
TechIMO Folding@home Team #111 - Crunching for the cure!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Why believe in a god? Just be good for goodness' sake
By vass0922 in forum DebateIMO: Politics, Religion, ControversyReplies: 195Last Post: February 22nd, 2010, 09:26 AM -
YEEHAAW! PURE REDNECK GOODNESS!
By draboo in forum IMO CommunityReplies: 8Last Post: March 30th, 2009, 01:09 AM -
Can one be the personificaton off goodness and cheat as well.
By Epidemic in forum DebateIMO: Politics, Religion, ControversyReplies: 9Last Post: March 9th, 2007, 01:25 PM -
Transparent terminal goodness
By SpookyEddy in forum Applications and Operating SystemsReplies: 4Last Post: February 9th, 2003, 07:58 PM -
Oh my goodness, she actually listens to me!
By nunyadam in forum IMO CommunityReplies: 9Last Post: June 17th, 2002, 02:17 PM



LinkBack URL
About LinkBacks






Reply With Quote



Usually it the over lengthy products which tend to lose steam In this case within the space of a running In the event, the mentalist (Woody Harrelson), Watch The Hobbit Online the conjurer (Jesse...
steam In this case within the...