led lights on tower

[presence06]

*sighs* ok ok...i got the hard drive led up and running, but the power light remains a mystery....i moved it like i said the where it shows and the computer didnt fire up, so i moved it back, and she fired up, ( 1st switch back, didnt have it in the righ spot)) and now the hdd led lights up, but no power....where does the PWER SW go???? for got the mention what it says..sorry

[VHockey86]

the power LED are prolly the 2 individual wires (they got on 2 seperate non-adjacent pins if you look at the picture I posted).
PWER SW sounds like power switch.. so ATX Power switch on the diagram

[presence06]

ok...but the two individual ones...does it matter..ones green +? and black -? theyre marked on the pins + atleast is?

[presence06]

that doesnt make much sence...sorry im half asleep..

[VHockey86]

Just look at the diagram man =)
You see the Power LED section right?
One is labeled (+) and the other is labeled (-).
Just plug the 2 individual wires on there and see if it works. If it doesnt work, just switch those two wires around. As previously stated, the colored one (green) is normally positive so try that on the positive power LED pin first

[presence06]

ok...WOOOT...thank you guys...and sorry if i was a burden...im not to bright with all the computer tech stuff..i like it but im not to bright when it comes to this stuff..so thanks again..the power led, and hd led are fired up..so thanks again..