+ Reply to Thread
Results 1 to 5 of 5
Thread: My web cam is not clear
April 11th, 2007, 12:03 AM #1
- Join Date
- Mar 2006
My web cam is not clear
I have a philips web cam it was fine earlier but now the pic quality is very less and blared any body to help me out there?DemhaTec
April 11th, 2007, 12:07 AM #2
is there a focus ring on it at all? ... if so use it.. if not make sure it hasnt changed its capture size from something larger to a lower quality imageMobile: Thinkpad T61 | WinXP Pro | C2D T8300 CPU | 3GB DDR2 | 320GB Hybrid SSD HDD | AGN & WWAN
Desktop: Dell XPS 8300 | 3.4 Ghz Intel i7 | 8GB DDR3 | 1TB OS, 1.5TB Mirrored DATA
April 11th, 2007, 12:18 AM #3
April 11th, 2007, 03:12 AM #4
Webcams is cheap nowadays
Philips should be an okay product. Yeah, I would advice you to check the focus. Else, if you have another computer, try have it plug on a different computer. See which causes the problem.If only the dead can speak, then we will know what's happening to us all next...
April 11th, 2007, 03:29 AM #5
Q: I'm getting an unsharp picture, how can I make it sharp?
A: Turn the lens ring until you get a sharp picture.
Just like what has been mentioned or try going into the properties of the webcam in the software your using to view it and try adjusting some of the settings for better quality too. If that doesn't work, you can find updated firmware/drivers for the web cam on their site.
Just go there and locate your camera, then on it's product page you will find it under product support.* ¨ )
(¸.·´ (¸.·´ ,.·´
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By carl33p in forum Networking and InternetReplies: 3Last Post: June 10th, 2008, 09:21 AM
By shauny36 in forum General Tech DiscussionReplies: 4Last Post: January 24th, 2005, 02:25 PM
By blu in forum Technical SupportReplies: 9Last Post: October 3rd, 2004, 02:35 PM
By nodnerb2 in forum General Tech DiscussionReplies: 1Last Post: May 4th, 2004, 07:33 AM
By freakster in forum General Tech DiscussionReplies: 3Last Post: February 6th, 2004, 12:49 PM