Need 40 ft cable for USB Printer (Type A to Type B) 
December 6th, 2008, 08:54 PM
|
#1 (permalink)
| | Junior Member
Join Date: Nov 2008
Posts: 4
| Need 40 ft cable for USB Printer (Type A to Type B)
I have had to move my home office and the only place my printer will now fit is on a shelf on the opposite side of the room from my computer. The distance to lay cable is about 33ft to 40ft. I have searched on the internet but too many options came up and most of them were confusing.
My printer (is ancient) is a Cannon MP370 Multipass. It plugs into my computer using a USB Type A Connector and plugs into the printer using a USB Type B connector.
Was wondering what my options were. | 
|  | |
December 6th, 2008, 09:11 PM
|
#2 (permalink)
| | SoMuchAnime-SoLittleTime
Join Date: Aug 2003 Location: Plymouth, WI
Posts: 14,692
|
USB cables can not be that long without repeaters. The maximum length is 10-15ft. | |
| | |
December 6th, 2008, 09:30 PM
|
#3 (permalink)
| | Junior Member
Join Date: Nov 2008
Posts: 4
|
"I have searched on the internet but too many options came up and most of them were confusing."
I have no clue what a repeater is | |
| | |
December 6th, 2008, 09:40 PM
|
#4 (permalink)
| | Ultimate Member
Join Date: Oct 2004 Location: Upstate NY
Posts: 1,634
|
__________________
If you don't volunteer don't bitch!
| |
| | |
December 7th, 2008, 05:50 AM
|
#5 (permalink)
| | Ultimate Member
Join Date: Oct 2001 Location: Texas
Posts: 1,238
|
__________________
I learned about the facts of life from "The Facts of Life".
Last edited by PoonDoggy : December 7th, 2008 at 05:54 AM.
| |
| | |
December 7th, 2008, 09:50 AM
|
#6 (permalink)
| | Junior Member
Join Date: Dec 2008
Posts: 10
|
The wireless is definitely a great idea - I run one of them myself at home!  | |
| | |
December 7th, 2008, 11:28 AM
|
#7 (permalink)
| | Ultimate Member
Join Date: Oct 2004 Location: Upstate NY
Posts: 1,634
|
That's great if you have a wireless network. | |
| | |
December 7th, 2008, 12:11 PM
|
#8 (permalink)
| | Junior Member
Join Date: May 1998
Posts: 4
| Wired vs Wireless comparison
To do the wireless network, you would need a wireless router, a wireless connection to your computer and a wireless printer server. Looking at Newegg, a Netgear wireless G router is about $40, a wireless ad apter for your computer would run $30-$40, and the print server would run from $75 to $150, for a total between $150 - $250. You might (should) be able to skip the router and go straight from the computer to the print server, saving $40.
A USB to Cat5 extender will run you $50 to $75, depending on whether you want powered or not. For the printer, you may well want a powered model. They are pretty simple. USB to the computer end of one extender, Cat 5 (ethernet cable) from extender to extender, USB from the remote extender to the printer. Supposed to be good out to about 200 feet. | |
| | |
December 7th, 2008, 12:25 PM
|
#9 (permalink)
| | Ultimate Member
Join Date: Nov 2008 Location: Ohio
Posts: 1,004
| Quote: |
The wireless is definitely a great idea - I run one of them myself at home! | The main thing people don't bother to check is to see how much steel is in the house. I myself have a steel desk so I can't run a wireless network unless I want to shield it which would cost about $200 or so I'm told by some friends. So the logical choice for me would be to stick with wires. | |
| | |
December 7th, 2008, 12:59 PM
|
#10 (permalink)
| | SoMuchAnime-SoLittleTime
Join Date: Aug 2003 Location: Plymouth, WI
Posts: 14,692
|
Steel may affect the speed/distance signal, but it still works fine. | |
| | | Thread Tools | Search this Thread | | | | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Most Active Discussions  | | | | |   Recent Discussions  | | | | |
 |
hardware
prices 
