Thread: iMedia s3720 GPU
-
August 10th, 2012, 06:28 AM #1Junior Member
- Join Date
- Aug 2012
- Posts
- 5
iMedia s3720 GPU
Hi there,
I own an iMedia S3720, found at: http://www.mrmemory.co.uk/assets/images/…
Would a HD 5670 1GB Graphics Card (Found at http://www.google.co.uk/products/catalog… fit in my tower?
Thanks.
-
August 12th, 2012, 06:37 AM #2Junior Member
- Join Date
- Aug 2012
- Posts
- 5
Bump because I really need a response soon.
-
August 12th, 2012, 07:35 AM #3Junior Member
- Join Date
- Aug 2012
- Posts
- 5
Edit: I'm going to get an HD 6670 1GB DDR5 card, with dimensions of 17.5 x 11.12 x 3.81 cm/6.89 x 4.38 x 1.5 in. Will this fit? Thanks.
-
August 13th, 2012, 01:32 AM #4
Measure the inside of your Case and mounting area for the card, if it needs dual slots of width see if you have the room. You now have the cards measurements, so just measure to see if you have the room or not.
i7 940//Corsair H60//EVGA X58 SLI LE//6GB Corsair Vengeance 1600MHz//2x EVGA GTX 560 Ti FPB SLI//NZXT Hale82 850W//CM 690 II Advanced//Win7 64//WD 74GB V-raptor, 750GB Black, 1.5TB Green
TechIMO Folding@home Team #111 - Crunching for the cure!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
imedia d3318 can i upgrade graphics ?
By wozkeo in forum Technical SupportReplies: 19Last Post: June 30th, 2009, 06:55 AM -
Sound card problems with Imedia 1307
By ANTIQCOOL in forum Multimedia and AudioReplies: 1Last Post: December 25th, 2008, 07:00 AM -
imedia No signal message on monitor??
By rossco808 in forum Technical SupportReplies: 1Last Post: December 18th, 2008, 07:56 AM -
Packard Bell iMedia pc problems...
By badgerspannerB in forum Technical SupportReplies: 3Last Post: July 4th, 2008, 11:49 AM -
iMedia PC wont recover itself
By htou in forum General Tech DiscussionReplies: 4Last Post: May 23rd, 2003, 02:23 PM



LinkBack URL
About LinkBacks



Reply With Quote

Make sure the valve cover isn't slightly warped too - I changed gaskets 3 times before realizing. At least on my 1988 it's aluminum, not sure yours had the same issue in your year.
Is It Just Me? v233893843