September 29th, 2007, 09:21 PM
|
#1 (permalink)
| | (AKA) Nakamura
Join Date: Nov 2003
Posts: 5,521
| how to dismantle Compaq nx6110 laptop
Hey, i bought a new cpu for my laptop, i want to dismantle it so i can put it in.... but i have no clue how to get to the cpu on a laptop ..... ???
i have tried to google, but can't find my laptop and a diagram on how to take it apart...
it's a compaq nx6110 .. if anyone has a clue how to do this... ?
| 
|  | |
September 30th, 2007, 02:52 PM
|
#2 (permalink)
| | (AKA) Nakamura
Join Date: Nov 2003
Posts: 5,521
|
going to bump this... any one have a clue on how to tear apart a lappy to get to a cpu !! lol...
bump up
| |
| | |
September 30th, 2007, 03:46 PM
|
#3 (permalink)
| | Folding@home since 1862!
Join Date: Feb 2007 Location: Folding@Home
Posts: 7,926
|
Most of the time when I've taken lappy's apart, I've never had the intention of putting them back together..lol
Sorry, I'm no help here....If anything consider this a bump... 
| |
| | |
October 1st, 2007, 02:42 PM
|
#4 (permalink)
| | Ultimate Member
Join Date: Jun 2007 Location: Bay Area
Posts: 2,211
|
Have you tried checking the manufacturer's website? They will typically have the best documentation for anything involving their own models. Especially if you got a manufacturer's approved CPU upgrade, they should have docs on how to replace it. I know with Dell that they will show you how to replace just about everything. | 
| | |
October 1st, 2007, 03:06 PM
|
#5 (permalink)
| | Ultimate Member
Join Date: Oct 2001 Location: Troy, Michigan
Posts: 1,698
|
Hey sweeper2,
I have the "Maintenance and Service Guide" in PDF format for the Compaq NX6110. If you want to PM you e-mail address to me, I will send it to you via e-mail. It is a 3MB file.
Todd 
__________________
1.20.13 - End Of An Error
| |
| | |
October 1st, 2007, 07:06 PM
|
#6 (permalink)
| | (AKA) Nakamura
Join Date: Nov 2003
Posts: 5,521
| Quote:
Originally Posted by Hey-Todd  Hey sweeper2,
I have the "Maintenance and Service Guide" in PDF format for the Compaq NX6110. If you want to PM you e-mail address to me, I will send it to you via e-mail. It is a 3MB file.
Todd | sure ! thanks !!!! | |
| | |
October 1st, 2007, 08:13 PM
|
#7 (permalink)
| | Ultimate Member
Join Date: Oct 2001 Location: Troy, Michigan
Posts: 1,698
|
It is on it's way - I hope it helps. | |
| | |
October 1st, 2007, 08:28 PM
|
#8 (permalink)
| | (AKA) Nakamura
Join Date: Nov 2003
Posts: 5,521
|
looks like it will help out a lot !!! shows everything !!! thanks again !!!!! | |
| | |
January 1st, 2008, 08:03 PM
|
#9 (permalink)
| | Junior Member
Join Date: Jan 2008
Posts: 2
|
You first have to get the keyboard off. There is a memory compartment on the bottom in the cneter. Open it up. There are 2 star screws that hold the keyboard in. Loosen and remove. On the display side of the keyboard there are 4 clips that need to be slid away from the screen toward the mouse pad. Then the keyboard should role out towards you. Keep in mind that there are still wires connected to it. Under the keyboard is the heat sink. Remove it to get to the CPU
Hope this helps.
Paul Quote:
Originally Posted by sweeper2 Hey, i bought a new cpu for my laptop, i want to dismantle it so i can put it in.... but i have no clue how to get to the cpu on a laptop ..... ???
i have tried to google, but can't find my laptop and a diagram on how to take it apart...
it's a compaq nx6110 .. if anyone has a clue how to do this... ? | | |
| | |
January 1st, 2008, 08:04 PM
|
#10 (permalink)
| | Junior Member
Join Date: Jan 2008
Posts: 2
|
You first have to get the keyboard off. There is a memory compartment on the bottom in the cneter. Open it up. There are 2 star screws that hold the keyboard in. Loosen and remove. On the display side of the keyboard there are 4 clips that need to be slid away from the screen toward the mouse pad. Then the keyboard should role out towards you. Keep in mind that there are still wires connected to it. Under the keyboard is the heat sink. Remove it to get to the CPU
Hope this helps.
Paul Quote:
Originally Posted by sweeper2 Hey, i bought a new cpu for my laptop, i want to dismantle it so i can put it in.... but i have no clue how to get to the cpu on a laptop ..... ???
i have tried to google, but can't find my laptop and a diagram on how to take it apart...
it's a compaq nx6110 .. if anyone has a clue how to do this... ? | | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | 
Posting Rules
| You may post new threads You may post replies You may not post attachments You may not edit your posts
HTML code is Off | | | |   Most Active Discussions  | | | | | Recent Discussions  | | | | | 
|
hardware
prices 
