Thread: video monitor wont come on
-
November 27th, 2004, 02:50 PM #1Junior Member
- Join Date
- Apr 2004
- Posts
- 5
video monitor wont come on
I need help bad! my computer was working fine, but i unplugged my cpu fan and plugged up another hoping to use a quite fan. the new fan was as loud so when i plugged the old fan back in, my monitor wouldnt come on. everything is plugged in and the cpu fan works fine, the video wont kick in for some reason.
pcdctr
-
November 27th, 2004, 02:55 PM #2
You may have loosened the video card when you installed the new fan, check to make sure that it is in the slot well.
-
November 27th, 2004, 03:01 PM #3
I'm haiving the same problem. I think it is the processor.
-
November 27th, 2004, 03:24 PM #4Junior Member
- Join Date
- Apr 2004
- Posts
- 5
I have an onboard video so thats not the problem, and the processor could be bad, but i have tried another cpu and still no luck, unless its bad too
-
November 27th, 2004, 03:28 PM #5
Or the board fried somehow?
-
November 27th, 2004, 03:31 PM #6Junior Member
- Join Date
- Apr 2004
- Posts
- 5
thats a possibility too.
-
November 29th, 2004, 11:40 AM #7
Dumb question
Do you have to connect the diskette drive in order for the board to boot?
-
November 29th, 2004, 06:41 PM #8Junior Member
- Join Date
- Apr 2004
- Posts
- 5
No your video should come on anyway, and by being able to read the monitor, it would tell you if the drive wasnt working or not.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Monitor Issues
By BattleToad in forum Technical SupportReplies: 15Last Post: August 22nd, 2004, 07:14 PM -
s-video out to a TV
By capybara in forum Graphics Cards and DisplaysReplies: 7Last Post: July 7th, 2004, 07:30 PM -
Dual Monitor through Video Out???
By thesystem in forum Graphics Cards and DisplaysReplies: 4Last Post: February 4th, 2003, 03:18 AM -
Computer dead?
By cecaraway in forum Technical SupportReplies: 11Last Post: March 12th, 2002, 02:25 PM



LinkBack URL
About LinkBacks



Reply With Quote

So what we really need is for government to put certain maximum accuracy restrictions in place for bolt action rifles and magazine restrictions for semi auto's . Perhaps we can add to that...
The perfect gift for an aspiring...