PTGD1-LA Front Panel connector?

MrSoundMan · June 30th, 2009, 05:19 PM

After searching google/metacrawler, I found nothing useful. Does anyone still have the details on what goes where for the front panel connector? I was going to put this mobo in a bigger case with a better cooling option and larger PSU but realized it was a specialized plug and the printing on the board is too tiny. It also looks like it is just numbers/letters like C62, F38, etc.

Also while I'm asking, what would I plug into that PCI45 slot on the bottom edge?

**RicheemxX** · June 30th, 2009, 05:40 PM

Well the second question I can answer, that is for a pci exnteder card for more pci slots you can see a pic here

As for the pinouts that might be a bit trickier. Since its an OEM board ASUS doesn't list it. So you might look for the pinout info on another intel 915g based board.

edit: I'm assuming the pinouts aren't labeled so this manual (pg 45 has the pinout info) for another similar 915g board might help

MrSoundMan · June 30th, 2009, 06:37 PM

I appreciate the help. Looks like that manual was for a 20pin and mine has 11 pins.

**RicheemxX** · June 30th, 2009, 06:42 PM

duh guess I should have noticed that from the pic. Well google did turn up a hit that should be helpful http://www.elhvb.com/mboards/OEM/HP/...erm_manual.pdf

MrSoundMan · June 30th, 2009, 07:08 PM

That got the job done. Many thanks...guess this topic can be closed or whatever.