RC410-M2 Motherboard Issues?? Help!!

**Patoh** · October 5th, 2009, 11:08 AM

My RC410-M2 motherboard has all its peripherals to enable it to run but when i huk it up to the monitor. it displays nothing and the power led just blinks. What am i Missing or Doing Wrong? Some1 help!!

**Aaron_8015** · October 5th, 2009, 11:10 AM

Hi and welcome.

Is this a new build? If yes I would remove from the case place on non-conductive surface and boot with minimum compnents.

**Patoh** · October 5th, 2009, 11:13 AM

No its Rev V1.0 .. I took the Motherboard Out Connected the power supply Ram and an ide hardisk and cd room and The power led just blinks. Am sure if the motherboard was damaged then the leds wudnt flash!!

**Aaron_8015** · October 5th, 2009, 11:21 AM

Do you have a speaker you can connect it up to to listen for any beeps?

Am sure if the motherboard was damaged then the leds wudnt flash!!

Thats not the case.... Say if one of you mem slots was not working, it would still try and boot.

**Patoh** · October 6th, 2009, 01:59 AM

So One Of my memory slots has a problem. i tried both slots and how come the bios does not load anything.. The Monitor is still blank. Plus i tried booting with Hirens Boot cd and still nothing .. My friend Thinks It Coulb be the bios. And Theas now a led labeled odd that just lights up. while poer is still blinking