Netgear WG602 Problems

[J1mmy]

I wanted to add wireless connectivity to the network, I've purchased a NG WR602 v2, hooked it up and appear to be running into problems with the internet.

The devices can connect to the device, but they won't get any internet connection. It is being attached to a uni network, so they have already assigned IP's.

I'm not quite sure what settings I need to experiment with to get the Internet across the devices, it only connects and establishes a local connection.

[videoman1994]

Try repairing or disabling and re-enabling your connection(sometimes certain wireless connections needs you to refresh the network while you use it), if still no dice then contact the people you get wireless from and have them come and see if they can resolve the problem, it also may be a wiring problem, is your modem connected to your internet cable? because when I moved my modem and router up a level I forgot to attach the internet cable, which allowed me to get access to the device but no internet, but right when I reconnected it to the right cable I was back with wireless.

[J1mmy]

I've tried all that, but i think its a little more complex than that.

I'm on my own with this one, there no one that can help. The setup is as follows:

-RJ45 into uplink on hub
-computers connected to hub
-NETGEAR also connected to hub

I contact a network guy, he said it should work, but of course they can't sit around offering technical support to 6000 students...

[J1mmy]

I've not also discovered that the netgear is causing all devices connected to the hub to lose their internet connection, when it's unplugged from the hub, everything is restored.