Cisco 3560 VLAN configuration Issue

[Umme_B]

Hello Everyone,

I am very new to switch configuration. I need help. I need to configure my network with a special VLAN. Following is the scenerio:

I have one 3560 switch with which I have got 1 Router, 1 Server, 1 Wireless Lan Controller (WLC -5505) & Switch from my existing network connected. Now I need to create a Vlan and impose it to 6 ports in 3560 switch. I need all my traffic flow goes via this Vlan from my existing network. I want to connect my server, WLC & switch from existing network with this Vlan.

I tried to do it but somehow when the Vlan is configured in the 3560 I could not ping the Server or the WLC from the devices within the same network. Then I removed the Vlan from the 3560 switch then I could ping and connect to the server remotely.

I need to create that Vlan in the 3560 switchports and connect my server, WLC & other switch in those ports. According to me I should be able to use VLan & connect to all my devices remotely but I have failed to do so. I have no idea now what I should do. Searched so many places but failed.

I will be very very grateful if anyone can help me with the configuration. Please advice me if I need to change configuration in my WLC as well.

Eagerly waiting for a reply.

Thanks

Umme

[Networker4321]

Hello Everyone,

I am very new to switch configuration. I need help. I need to configure my network with a special VLAN. Following is the scenerio:

I have one 3560 switch with which I have got 1 Router, 1 Server, 1 Wireless Lan Controller (WLC -5505) & Switch from my existing network connected. Now I need to create a Vlan and impose it to 6 ports in 3560 switch. I need all my traffic flow goes via this Vlan from my existing network. I want to connect my server, WLC & switch from existing network with this Vlan.

I tried to do it but somehow when the Vlan is configured in the 3560 I could not ping the Server or the WLC from the devices within the same network. Then I removed the Vlan from the 3560 switch then I could ping and connect to the server remotely.

I need to create that Vlan in the 3560 switchports and connect my server, WLC & other switch in those ports. According to me I should be able to use VLan & connect to all my devices remotely but I have failed to do so. I have no idea now what I should do. Searched so many places but failed.

I will be very very grateful if anyone can help me with the configuration. Please advice me if I need to change configuration in my WLC as well.

Eagerly waiting for a reply.

Thanks

Umme

Umme,

Log onto cisco . com and search for support section, look around until you see a spot where you see maintenance and click until you can open a TAC case, They will contact you promptly.You'll need the SN on the 3560.

Good luck,

[GroundZero3]

Please post your entire config of your switch.

Also you can look up the configuration guide here:

Cisco Catalyst 3560 Series Switches Configuration Guides - Cisco Systems

Just pick the IOS that you have installed

[Umme_B]

Unfortunately I do not have access to Cisco TAC.

Regards,

Umme

[Umme_B]

Please post your entire config of your switch.

Also you can look up the configuration guide here:

Cisco Catalyst 3560 Series Switches Configuration Guides - Cisco Systems

Just pick the IOS that you have installed

Thanks I'm trying to sort it out now.

Regards,

Umme