+ Reply to Thread
Results 1 to 14 of 14
March 31st, 2004, 06:06 PM #1
Need a High Performance heatsink fan
I am using a Arkua 7528 heatsink/fan on my XP2000. It cools pretty good but I want to do a little overclocking and I want a more powerful fan. The fan on this heatsink is a 70x70x15mm with a 36.26 cfm rating. I would like another 70mm fan that has more cfm's then this one. I have looked around at allot of websites and I can only find 70's that run less cfm's. Does anyone know of a fan that fits my requirements?
March 31st, 2004, 06:23 PM #2
don't know if there are any 70mm fans that will push more then that.
That's about the best I've seen.
Those Arkua's are pretty neat heatsinks though... Hate to have to swap it out for something else.
March 31st, 2004, 06:27 PM #3
how about an adapter then use a bigger fan" If you kill a man you're a murderer ..... Kill many and you're a conquerer ....... Kill them all ... your a GOD...."
March 31st, 2004, 06:28 PM #4
Well I think if I can't find a 70 that pushes more i'll try and find an adapter from 70 to 80, if they make them.
These Arkua's are great, I really like mine. That's why I want to mod it instead of changing it.
I had this on my T/bird 1000 and one day I was doing something, testing a processor I think, and I forgot to plug in the fan lead and turned it back on and left it for about an hour, came back in and smelled it and knew what I forgot to do. I couldn't plug it back in because it was so hot so I used some needle nose pliers and plugged the fan back in and watched the temps go from 97 celsius back down to 38 celsius.
Last edited by gbpec7; March 31st, 2004 at 06:37 PM.Give thanks unto the Lord....His love endures forever.
March 31st, 2004, 06:29 PM #5
Heheheee, I just seen your post OmarGive thanks unto the Lord....His love endures forever.
March 31st, 2004, 06:44 PM #6
With one of these adjustable fans....
would make for ALOT more airflow... the aerodynamics of having the adapter funnel the air down to a smaller longer passage, in of itself, will improve the cooling and reduce if not eliminate any "dead" spots you had before...
March 31st, 2004, 07:01 PM #7
Thanks for the links JPMiller, I really like this fan http://www.svcompucycle.com./thersmarcasf.html.
As far as dead air is concerned, that is the main reason I like this style of heatsink, that dead air in the center of the fan is not an issue because the heatsink fins are directly in line with the fan blades.
March 31st, 2004, 07:19 PM #8
Do you have a window?
What are you using for thermal compound?
have you lapped the bottom of your heatsink?
March 31st, 2004, 07:37 PM #9
No I don't have a window, eventually I'll put one in. I'm just using regular heatsink paste, the Arkua is machined so good I haven't had to lap it. When I start doing this overclocking I plan on lapping it though. My friend has a tube of AS3 that I can use.
I like that "TRIBAL SUN" grill but it says it's out of stock.Give thanks unto the Lord....His love endures forever.
April 27th, 2004, 09:56 PM #10
- Join Date
- Apr 2004
get an 80mm to 70mm adaptor and get an 80mm thermaltake smart fan II(if u prefer performance to fancy)
LOL i just posted this and after that I just realized that JPMiller already posted the same fan
anyway I have this smart fan 2 and it sure is windy, but noisy as well
Last edited by Ranma; April 27th, 2004 at 10:01 PM.
April 27th, 2004, 10:06 PM #11
Thanks Ranma, I have a nexus fan controller so I can run it at half speed until I need it.Give thanks unto the Lord....His love endures forever.
April 27th, 2004, 10:35 PM #12
Your HSF looks about identical to the Thermal Integration V77L. The fin design (open bottom) should make the fan adapter idea work very well. Most heatsinks have a closed bottom design. That and the restriction of the adapter creates enough back pressure that temps often go up with an adapter solution. The v77L works very well on its own. I'm about to adapt mine to an 80mm fan. I've notied that the adapter doesn't fit down into the plastic deal on top of the HS. I'm going to use some rope caulk to fill the gaps and provide a smooth air tunnel. I'm going to try the lowest powered 80mm I have on hand first - I want some quiet with my cooling.
. The standard 70mm fan on mine is a feisty little bugger - 0.40 Amp!
.bh."Our freedom depends on five boxes: soap, ballot, jury, witness; and, when all else fails, Ammo. " ?author?
April 28th, 2004, 06:02 AM #13
Originally posted by gbpec7
- Join Date
- Apr 2004
Thanks Ranma, I have a nexus fan controller so I can run it at half speed until I need it.
(thats why its called smart fan )
silly me, I just realized the nexus is placed at the drive bay
April 28th, 2004, 09:05 AM #14
Hey zepper, the design of these heatsinks I think is far better then the basic design of heatsinks in respect to using the fan to it's best ability. By that I mean most fans have a "dead spot" in the center of it and this vertical fin design works great to take advantage of that. I have a my fan controller set at half speed and my cpu temp is 32.0 celsius.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)