Windows does not show overclock

**ll40** · September 9th, 2010, 12:55 AM

I did everything only what was possible in OS,but when it starts windows 7in cpuid is not showing the overclock.Please help me what to do! Thank's everybody

**RobRich** · September 9th, 2010, 01:02 AM

Welcome to TechIMO! :) Thread moved to overclocking forum. ;)

**RicheemxX** · September 9th, 2010, 01:15 AM

Well according to cpuid you aren't even running it at stock speeds let along OC'd and looking at the other pics there is only one that is helpful is the second one.

Can you give us more info, what board are you using? have the bios updated?

Why is the bios date so far off??

Do you get any errors once you save the setting and the board re-boots? It almost appears as though you are pushing the OC too far and the board is defaulting back to the stock bus freq.

Just to let you know, if this is a new build you should never make such a big OC right from the start. You want to bump speeds slowly not a giant leap all at once.

**ll40** · September 9th, 2010, 01:25 AM

I already didi 3,6 but when i default everything is not working on second time,iam using ga ep45t-ud3rl q6600 ram 4 gb kingston ddr3-1333

**ll40** · September 9th, 2010, 01:28 AM

Bios was updated to f10 version ,i run for 3,6 and worked it very well

**KarmaKiller** · September 9th, 2010, 01:44 PM

First off, your multi is only set to 8x. It should be at 9x at least, unless your following a OCing guide of some kind that tells you to set it to 8.
Your problem is probably CE1 or one of the other power saving features. It's down clocking your CPU when it's not under load to save power/heat. If you were to put the cpu under full load, you'd probably see the clocks jump up to whatever your OC is set too.
So look for a power saving feature that's still enabled (hint, it's in none of the screen shots you posted) and see if that helps.

**RicheemxX** · September 9th, 2010, 02:40 PM

I just assumed he's running the 8x multi so he could run the 500mhz bus to achieve the 4ghz he's looking for. Like you said probably from some OC guide?

From the pics it shows he's already got C1E and EIST disabled. The only other setting which would also be in the advanced tab would be the C2/C2e and C4/C4E State Support.

**ll40** · September 9th, 2010, 02:46 PM

i don't have them

**KarmaKiller** · September 9th, 2010, 02:53 PM

Spread Spectrum maybe? One of the power saving features is on if your multi is lower then 9x unless you manually set it there.
And like Rich said above, your gonna have to work your way up to a high OC like 3.6ghz or over. Those chips really varied on OC ability. Some of them would do 4Ghz no problems, others it would be hard to get 3.4Ghz or more. It's best to start with a lower OC and work your way up in small steps, testing for stability/heat problems along the way.

**ll40** · September 9th, 2010, 03:03 PM

is not going at all,i put everything back to fsb 400 multi 9 ----nothing

**RicheemxX** · September 9th, 2010, 03:05 PM

Reset your bios and start from scratch, if you had it stable at 3.6ghz start off with those settings and bump it a little, test and bump it some more.

**ll40** · September 9th, 2010, 03:20 PM

I reset the comp,then i adjust fsb 400 and multi 9
Ater that i start and on cpuid multi is it change from 6 to 9 and again,frequenssy also from 2400 to 1600 .But i am not catching EIST is disabled ,Term 2 Disabledd ,who's controll it ? i got no cluee what to do else ,i don;t have another option on my bios.I searched everything

**ShyguyXPC** · September 10th, 2010, 01:45 AM

Have you tried Running CPU-Z while running another CPU intensive Program in Windowed mode, to see if the CPU clocks back up to its set clock speeds?

though my system is different, and I believe I have some of the power saving things on in the Bios, my i7 920 runs at 2.66GHz, but when idle throttles down to 1.6Ghz or so, I ran a Video transcoding app called SUPER, that uses CPU processing for the tasks, converted a small 5MB AVI file and immediately the CPU throttled up to full 2.66GHz.

just about any program that uses the CPU could be used, even a Windowed version for Prime95, Prime95 (32bit) - 25.11 Download - EXTREME Overclocking

just run it for a few moments windowed and with CPU-Z opened up as well, and see if the clock speeds do go up.

Which is basically what KK suggested above by putting the CPU under load and see if the Clock speed increases.

**ll40** · September 10th, 2010, 02:13 AM

I did but nothing.I open cpu-z in first windows then prime 95 in another one ,start running prime and what shows on cpu:multy is jumping from 6 to 9 ,core speed is standing between 2400 and 2402,the fsb 1633,all 4 cores are running at 99-100% load.
Really iam not catching whats going on.Why was working before and is not working anymore, wht option i have to disable,it's impossible i checked the whole bios at least 15 times in a row.