August 19th, 2002, 11:55 AM
|
#11 (permalink)
| | Member
Join Date: Nov 2001 Location: Canada
Posts: 270
|
but why does it constantly beep even though i have underclocked the processor?
btw is there a #techimo channel on irc of some sort?
Last edited by <[o_0]> : August 19th, 2002 at 12:07 PM.
| ![<[o_0]> is offline](http://images.techimo.com/timo_images/forum/images/statusicon/user_offline.gif)
|  | |
August 19th, 2002, 12:28 PM
|
#12 (permalink)
| | Ultimate Member
Join Date: Oct 2001 Location: Ohio (transplanted f
Posts: 3,107
|
Is there a jumper on this board to select between 100 and 133 FSB?
__________________
There's only two things in life. But I forget what they are.
| |
| | |
August 19th, 2002, 12:30 PM
|
#13 (permalink)
| | Member
Join Date: Nov 2001 Location: Canada
Posts: 270
|
dont think so, all the overclocking adjustments can be done through the bios. That is, I didnt see any jumpers in the manual for that.
BTW what does it mean when it says CMOS Checksum Error?
Last edited by <[o_0]> : August 19th, 2002 at 02:28 PM.
| |
| | |
August 21st, 2002, 11:14 AM
|
#14 (permalink)
| | Fossil
Join Date: Oct 2001 Location: inside the Beltway
Posts: 5,234
|
Sounds like it means bad news. Can you flash the BIOS with an updated version?
By the way, how do you pronounce "<[o_0]>" -- "Tafkap"? | |
| | |
August 21st, 2002, 11:45 AM
|
#15 (permalink)
| | Ultimate Member
Join Date: Oct 2001 Location: Sydney, Australia
Posts: 3,703
|
Ermm, if you have a 200 Athlon, then you shouldn't need to go to 133Mhz FSB, it should be set at 100Mhz FSB. So i'm guessing you've actually got a 266 Athlon.
Which chipset does your mobo use? If the chipset is KT133 then it wont actually go to the 133Mhz FSB, if you have a KT133A or better, then you shouldn't have any problems getting it to 133Mhz FSB.
Do you have the latest BIOS installed?
JayMan | |
| | |
August 21st, 2002, 12:10 PM
|
#16 (permalink)
| | Ultimate Member
Join Date: Oct 2001 Location: Reno, NV
Posts: 1,608
|
I am using an Asus A7V at home that has the KT133 chipset on it. The board becomes unstable at anything above 105fsb. With the Abit KT7 you might be able to get a little bit higher but not too much. You also said that you could not choose a higher multiplyer than 12.5. If you can get back into the BIOS, you should look into an upgrade for your BIOS. I had to upgrade mine to support the 1.3 and 1.4 TBirds. Even if you have a 1.33 TBird, you should still be able to run it at 1.3 on the 100FSB settings.
Happy Troubleshooting  | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | 
Posting Rules
| You may post new threads You may post replies You may not post attachments You may not edit your posts
HTML code is Off | | | |   Most Active Discussions  | | | | | Recent Discussions  | | | | | 
|
hardware
prices 
![<[o_0]>'s Avatar](http://www.techimo.com/forum/customavatars/avatar1162_2.gif){kind=avatar}
![Send a message via ICQ to <[o_0]>](http://www.techimo.com/forum/images/misc/im_icq.gif){kind=small}
