December 24th, 2002, 02:06 AM
|
#1 (permalink)
| | Member
Join Date: Nov 2002
Posts: 167
|
__________________
AMD 2400+
Abit Kx7 Raid
4 40gig 7200 WD HD's
2 IBM Deskstar 68pin SCSI 15000 RPM HD's 18.2 gig
MSI G-F4 128mb DDR
TDK 40-12-48 CDRW
25 inch Sony Trinitron
512 mb Corsair PC2700 DDR
Swiftech MCX370 CPU Fan
--------------------------------------
What's a Pentium????:D
Last edited by xjjeep96 : December 24th, 2002 at 08:44 AM.
| 
|  | |
December 24th, 2002, 06:50 AM
|
#2 (permalink)
| | just passin thru
Join Date: Oct 2001 Location: SW, OHIO
Posts: 5,774
|
Catch me if you can..... 
Nice job xjjeep96 !
I think mine is maxed out. It actually hasn't hit that high since. Not sure what I did.  Ahh, I'll just get a new chip. Muhahahahaaa.... 
__________________
P4 2.4C@3.2GHz, 2GB Patriot Extreme DDR400 @ 426MHz, GeCube Radeon x1950xt 256mb AGP, MSI 865PE Neo2-P, WD 60GB HD / WD External 500GB HD / Enermax Whisper 460w PSU MYSPACE
| |
| | |
December 24th, 2002, 07:52 AM
|
#3 (permalink)
| | Cruizing
Join Date: Oct 2001 Location: Wellington, NZ
Posts: 4,398
|
| |
| | |
December 24th, 2002, 08:54 AM
|
#4 (permalink)
| | Member
Join Date: Nov 2002
Posts: 167
| http://image1ex.villagephotos.com/1234784.jpg http://image1ex.villagephotos.com/1234783.jpg
I got it to post and boot ONCE @ 146fsb........ran 3dmark and it got the BSD on the LAST test...........so no score..... 
But it did @ 145 had to bump the Vcore to 1.9, and the ddr to 2.65v....completely stable then.....I think my problem is my Ram.....it's generic pc2700.....actually I think it's just OC'ed 2100....wonder if Santa is still taking requests?? If your listening Santa........How's about some Corsair XMS pc3500??? I've been "reasonably" good this year!!
Last edited by xjjeep96 : December 24th, 2002 at 08:57 AM.
| |
| | |
December 24th, 2002, 05:06 PM
|
#5 (permalink)
| | Member
Join Date: Nov 2002
Posts: 167
|
I think I'll stick with my 2400.......but maybe go to the NV30 if it ever comes out........  | |
| | |
December 24th, 2002, 07:38 PM
|
#6 (permalink)
| | just passin thru
Join Date: Oct 2001 Location: SW, OHIO
Posts: 5,774
|
I tried bumping mine today and kept getting BSOD. I had it at 2.88GHz 1.7v and the DDR333 @ 2.7 and it went through half the benchmark and BSOD. It will run fine at 2.8GHz, but that's all she's got. | |
| | |
December 24th, 2002, 08:07 PM
|
#7 (permalink)
| | Senior Member
Join Date: Nov 2002
Posts: 524
|
ive got my 2.4 stable at 143 fsb, anything higher and it locks up. if i do decide to go higher what should i do with the cpu ratio?? its at 8 right now.
franklinz | |
| | |
December 24th, 2002, 10:22 PM
|
#8 (permalink)
| | Member
Join Date: Nov 2002
Posts: 167
|
What do you have again sweeper? chip ? | |
| | |
December 25th, 2002, 06:45 AM
|
#9 (permalink)
| | just passin thru
Join Date: Oct 2001 Location: SW, OHIO
Posts: 5,774
|
P4 2.4GHz (400FSB) 24x117=2.8GHz 1.65v (when benchmarking).
I keep it at 2.4 for everyday use. | |
| | |
December 25th, 2002, 06:51 AM
|
#10 (permalink)
| | just passin thru
Join Date: Oct 2001 Location: SW, OHIO
Posts: 5,774
| franklinz You have your 2.4(533FSB) @ 18x143=2574MHz .... Correct? I'm not sure what you mean by CPU Ratio at 8? Have you tried bumping the Vcore? | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | 
Posting Rules
| You may post new threads You may post replies You may not post attachments You may not edit your posts
HTML code is Off | | | |   Most Active Discussions  | | | | | Recent Discussions  | | | | | 
|
hardware
prices 
