October 10th, 2007, 01:53 AM #1
Laptop SATA and Desktop SATA different?
I have a laptop with a hard drive that is going bad (Sony VGN-S460P Laptop). According to Sony's specifications page, the laptop has an 80GB SATA hard drive at 5400 RPM.
I'd like to get the drive out and connect it to another computer (my desktop) to try to run some data recovery software on it like EasyRecovery and see what I can save on the drive. The system still partially boots Windows, but then gets to a point where it hits too many corrupted files and reaches a Blue Screen. I know the drive is failing since I ran Hitachi's drive testing program on it as well as Windows' CHKDSK from a recovery CD; both say there are too many bad clusters present on the drive to recover what data is left.
Is the specification for a laptop SATA drive the same as for a desktop SATA drive? Can I simply pop this drive out and use the same cables as for a desktop SATA drive to connect it to my computer, or do I need a converter like for the old IDE laptop drives?
Thanks for your help.Logic shall prevail.
October 10th, 2007, 08:51 AM #2
You'll need to take a look at the drive....Odds are it'll use the same cables..
Odds are also that you shouldn't need a recovery program. The corrupted files are probably windows files...Have you done a repair install to try and fix the corrupted files?The propeller is just a big fan in front of the plane used to keep the pilot cool. When it stops, you can actually watch the pilot start sweating.
October 10th, 2007, 01:45 PM #3
If its a laptop SATA drive, it may not use the same type of SATA connection depending on the type of drive it is. Some have power and data built together and dont use the Desktop type connector for power. Ideally, you should be using an external enclosure to ensure that it has the same type of connection.
October 11th, 2007, 02:36 PM #4
- Join Date
- Oct 2001
- Augsburg, Germany
2.5" drives use "normal" size SATA connectors.
October 15th, 2007, 03:01 PM #5
I pulled the drive out of the laptop. It did use a single, combined power + data connector within the laptop, but after I disconnected that cable from the drive, I could see that the combined cable was just a convenient idea for the manufacturer - the plugs on the drive are indeed standard SATA data and SATA power connections.
I hooked up the drive to my desktop computer. Unfortunately, it is too far gone to save any data - it now makes slamming "clicking" noises and screeches loudly as soon as it is powered on. Oh well. At least I'm diligent about making backups - my last one was September 25th, so very little data was lost... Just some photos from a recent trip to Cape Cod; my family had their cameras, though, so hopefully I can snag the pictures from them next time I see them.Logic shall prevail.
October 15th, 2007, 04:39 PM #6
Thats good to hear FatalException. It always pays to make good backups.They say technology slows down for no one. I know it outruns my wallet. I figure its because my wallet isn't light enough yet.
TechIMO Folding@home Team #111 - Crunching for the cure!
dulce bellum inexpertis
October 24th, 2009, 09:31 PM #7
- Join Date
- Oct 2009
Well last year with all my moving around with the USMC I had bought a gaming laptop, which worked wonderfully until last week when I spilled a cup of vodka and cool-aid on it. Took it apart hoping all it needed was a cleaning when I discovered the components next to the power-source jack looked like a 10 year old car battery that had never been cleaned, it also literally burned out 3 or 4 prongs on the screen jack... So... laptop dead, but hard drive potentially not (I hope) didn't see any damage near the hard drive anyway.
Seeing as the laptop got roasted and I'm not going anywhere for a while I took the nightmare as a blessing and excuse in disguise to build a new machine. I want all of my data back however, and I can't find an adapter anywhere but the internet, and I'm an impatient person. What I noticed however is the sata jacks on the laptop hard drives are exactly the same as my WD caviar black that I just put in this desktop. And as luck would have it I have a spare set of sata cables. Given the discussion above it looks like I shouldn't have any problems, but I have a question or two. If I plug the drive into the desktop satas (which go directly to the mobo ofc) do I then have to set those drives up via bios, or will the OS just recognize them? I know that's a really amateur question but that's because I'm an amateur.
October 25th, 2009, 12:51 PM #8
Yup, connectors on laptop and desktop SATA are the same - that's why they're so flimsy - a minor change would make the desktop's much sturdier...
.bh."Our freedom depends on five boxes: soap, ballot, jury, witness; and, when all else fails, Ammo. " ?author?
December 22nd, 2010, 07:02 AM #9
- Join Date
- Dec 2010
similar line of thought
I have my own question along the same lines. I have an old notebook dvd drive that I would like to use for a custom case/computer build. The sata cable is fine but the power plug is a six pin not a 15 pin standard as the power supply well supplies. is there an adapter that can be purchased to complete this goal and if so what is the plugs name. Or is this just a pipe dream?
July 8th, 2011, 08:14 PM #10
- Join Date
- Jul 2011
Can i use laptop hdd as main hard drive?
For some months ago my acer laptop got an insult on the motherboard(i belive) and never wanted to turn back on. The only thing happening is that i turn on the power and about 5-6 secounds it shuts down again, nothing is showing on the screen. Maybe BIOS problems after all , but not my case now.. Now i wonder if i can use that same hdd on my desktop? As the main hdd. The hard drive has two connectors, one 15 pin serial ata and an 6 pin as well, my question then is if i should power the hdd trough the sata connectors on the motherboard or an 4 pin molex to the motherboard(can be from psu aswell)? Cuz when i press the start button everything seems to be ok, but my monitor is just sayin DVI power saving mode and turns off.. The computer still goes and also can charge my ipod.. I have taken out both my ram and gpu to clean it but still the same.. What can it be? Is the hdd screwed or an bios problem on my motherboard? Considering buying new parts but i want it to work in the meanwhile!
July 10th, 2011, 12:01 AM #11
- Join Date
- Feb 2009
- KFNL FS2004
- Blog Entries
Get one of these: Laptop SATA to Desktop Serial ATA SATA Data Power Cable | eBay
Here's one from the U.S 18" inch Slimline SATA Cable for Slim Laptop Drive | eBay
If you think that the current OS on the hard drive will work in the desktop, it won't. The system configurations are different. You could however install the laptop hard drive to the desktop and run the Windows cd and do a repair install. That may change the system properties in the laptop's hard drive to match that of the desktop's.
How to Perform a Windows XP Repair Install I assume you are using XP.
Last edited by Taxmancometh; July 10th, 2011 at 12:12 AM.
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
By Fat Man Stan in forum MotherboardsReplies: 45Last Post: March 24th, 2009, 12:48 AM
By Namie in forum Storage RelatedReplies: 11Last Post: July 8th, 2007, 04:46 AM
By rabidaardvark in forum Mobile ComputingReplies: 4Last Post: August 15th, 2005, 04:26 PM
By gipanizer in forum Technical SupportReplies: 0Last Post: February 20th, 2005, 11:01 PM
By poopeyhed2 in forum PC ModificationReplies: 3Last Post: October 2nd, 2003, 09:58 PM