The point:
SCSI can not be activated in BIOS if SATA RAID present; OS will not
load.
The Question:
How can I have my SCSI tape drive detected without loosing my OS SATA
RAID installation?
Details:
I have a Gateway brand E-9510T server for which I lost the original OS
build on SCSI RAID. It never did accept the OS installation on SCSI so
I opted for setting up SATA RAID. I updated all firmware.
BIOS: SE7520AF20.15A.P.06.00.00108
Mother Board: WME87130 W/ intel E7520 chipset.
I have a SCSI tape drive I need to install but the OS is not
recognizing it due to the SCSI RAID option being deactivated to avoid a failed boot.
Thanks.