+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 24
  1. #1
    I Void Warranties KarmaKiller's Avatar
    Join Date
    Feb 2007
    Location
    Springfield
    Posts
    13,484
    Blog Entries
    5

    TIMO stalling out.... again

     
    So I'm pretty sure there was a thread about this not too long ago, but I can't seem to find it.
    Anywho, when I submit a post, it just "stalls" out. I've let it sit up until FF actually gave me a "timed out" page.
    But if you open a new tab, the post has been made.

    Is there work going on with the server or something?
    (It's like this on 2 PC's in my house)
    Q6600@4Ghz | i7 920@4.4Ghz |E6320@3.5Ghz
    FAQ's ~ Team Stats
    My PC

    TechIMO Folding@home Team #111 - Crunching for the cure!

  2. #2
    PC Upgrade Procrastinator ShyguyXPC's Avatar
    Join Date
    Sep 2004
    Location
    Minnesota
    Posts
    17,369
    yep, happened to me again a little bit ago too, running FF3.5 had to shut FF down, and restart it to get it to respond, even then using FF's shortcut words to go to a bookmarked page (in this case I just type out "timo" in the address bar to get here), stalled and wouldn't load several times, after hitting the refresh button about 2 dozen times, then typing Timo again, it finally loaded the main page.

    oddly though my reply in the thread I was in submitted and was posted when I got the stalling.
    i7 940//Corsair H60//EVGA X58 SLI LE//6GB Corsair Vengeance 1600MHz//2x EVGA GTX 560 Ti FPB SLI//NZXT Hale82 850W//CM 690 II Advanced//Win7 64//WD 74GB V-raptor, 750GB Black, 1.5TB Green

    TechIMO Folding@home Team #111 - Crunching for the cure!

  3. #3
    I Void Warranties KarmaKiller's Avatar
    Join Date
    Feb 2007
    Location
    Springfield
    Posts
    13,484
    Blog Entries
    5
    Seems to be happening again. When you click the "post reply" after typing your response, it stalls out, and eventually times out for me. If I open up another tab with TIMO, it shows the post as being made..
    Q6600@4Ghz | i7 920@4.4Ghz |E6320@3.5Ghz
    FAQ's ~ Team Stats
    My PC

    TechIMO Folding@home Team #111 - Crunching for the cure!

  4. #4
    Anime Otaku RobRich's Avatar
    Join Date
    Oct 2001
    Location
    Tampa, FL USA
    Posts
    115,847
    Blog Entries
    67
    I have noted the issue as well. I will forward an error report to Scott.
    Robert Richmond | Infinite perceptions. One reality.
    TechIMO.com Editor-in-Chief

  5. #5
    I Void Warranties KarmaKiller's Avatar
    Join Date
    Feb 2007
    Location
    Springfield
    Posts
    13,484
    Blog Entries
    5
    Thanks RR!


    Also noticed it also does it on reporting posts..
    Last edited by KarmaKiller; September 17th, 2009 at 02:53 PM.
    Q6600@4Ghz | i7 920@4.4Ghz |E6320@3.5Ghz
    FAQ's ~ Team Stats
    My PC

    TechIMO Folding@home Team #111 - Crunching for the cure!

  6. #6
    Ride 'em Cowboy Steve R Jones's Avatar
    Join Date
    Oct 2001
    Location
    Dallas, TX
    Posts
    12,375
    It happened to me too am hour ago....I always quickly copy my post while I can just in case...and after hitting the refresh button my post was posted...


    EDIT: This post did it too....After waiting sixty seconds for the post to finish, I hit F5 and boom - all is well.

    ROB - my company has six servers at the same place that Scott has this one...Thier Portal web site was down while ago....Maybe they be having issues and need some support
    Last edited by Steve R Jones; September 17th, 2009 at 03:01 PM.
    Imagine a world where dogs took bad owners to the pound...

  7. #7
    Ride 'em Cowboy Steve R Jones's Avatar
    Join Date
    Oct 2001
    Location
    Dallas, TX
    Posts
    12,375
    Edit save and post above went fast...testing again



    EDIT: New quick post no workee fast.
    Imagine a world where dogs took bad owners to the pound...

  8. #8
    Ride 'em Cowboy Steve R Jones's Avatar
    Join Date
    Oct 2001
    Location
    Dallas, TX
    Posts
    12,375
    Post reply Test

    EDIT: Regual post reply is slow too..

    Edit/save and post works well.
    Imagine a world where dogs took bad owners to the pound...

  9. #9
    Reap what you sow Aaron_8015's Avatar
    Join Date
    Nov 2006
    Location
    Portsmouth, UK
    Posts
    4,159
    Blog Entries
    1
    I am finding the pages are loading slow also. (not sure if thats just my net but its slower than usual).
    I7 920 @ 4.2Ghz/6GB//GTX480 SLI/M4 64 GB + 1.5 TB + 2x 640 GB/Corsair TX950/ASUS blu-ray/ASUS P6X58D-E + X-Fi /LC PCK62

    TechIMO Folding@home Team #111 - Crunching for the cure!

  10. #10
    Ultimate Member cksboy15's Avatar
    Join Date
    Nov 2008
    Location
    Columbus, Ohio, Unit
    Posts
    1,427
    I've noticed its slower too. I have also noticed links sometimes sending me to a blank page.
    Last edited by cksboy15; September 17th, 2009 at 04:15 PM. Reason: firefoxs spell checker fails me
    Verizon FiOS Tier 2 Technical Support

    TechIMO Folding@home Team #111 - Crunching for the cure!

  11. #11
    FLAC Trooper ArcticFox's Avatar
    Join Date
    Jan 2003
    Location
    A theater near you
    Posts
    5,424
    It did it for me on this page as well - the OP was loaded right away and then it took maybe 10 seconds for the rest of the page.

  12. #12
    Goverment property now GroundZero3's Avatar
    Join Date
    Oct 2001
    Location
    NOVA
    Posts
    33,798
    Blog Entries
    46
    I just had it happen at 8:32am today

  13. #13
    Goverment property now GroundZero3's Avatar
    Join Date
    Oct 2001
    Location
    NOVA
    Posts
    33,798
    Blog Entries
    46
    Cant get into the community now

  14. #14
    Ride 'em Cowboy Steve R Jones's Avatar
    Join Date
    Oct 2001
    Location
    Dallas, TX
    Posts
    12,375
    Test

    EDIT: This test post went well Took two seconds to post.
    Imagine a world where dogs took bad owners to the pound...

  15. #15
    to F@H or not to F@H ? Cmptr-Gy-Dv's Avatar
    Join Date
    Dec 2006
    Location
    MN
    Posts
    4,594
    ba da bing loaded
    i'm folding for techimo!! what are you doing?

  16. #16
    Prof. of DooGlian Studies MegalosSkylaki's Avatar
    Join Date
    Oct 2001
    Location
    Nr. GroundZero NYC
    Posts
    7,977
    I get sent to a list of of Posts , rather than the normal page at times. I have to repeat request for TIMO when that happens.

    DOOOOG
    FIRST EIGHT YEARS ANNIVERSARY HONOR ROLL
    this April 18th, 2012 and will be Officially Celebrated That Day! SEE http://www.techimo.com/forum/imo-com...ml#post1070600

  17. #17
    Ultimate Member cksboy15's Avatar
    Join Date
    Nov 2008
    Location
    Columbus, Ohio, Unit
    Posts
    1,427
    I have also noticed links sometimes sending me to a blank page
    Now its all links that go to a site outside of this one. Like newegg I select a link and it takes me to a white page.

    So in order to know what people are talking about I have to manually type the address. I can still link them though.

    EDIT: back to most not all. I have ran scans and nothing came up.
    Verizon FiOS Tier 2 Technical Support

    TechIMO Folding@home Team #111 - Crunching for the cure!

  18. #18
    Ride 'em Cowboy Steve R Jones's Avatar
    Join Date
    Oct 2001
    Location
    Dallas, TX
    Posts
    12,375


    Seems to be doing it again.
    Imagine a world where dogs took bad owners to the pound...

  19. #19
    Anime Otaku RobRich's Avatar
    Join Date
    Oct 2001
    Location
    Tampa, FL USA
    Posts
    115,847
    Blog Entries
    67
    Known issue, and it is currently being monitored. Last I heard, the underlying problem might be further up the hosting chain than our server grid.
    Robert Richmond | Infinite perceptions. One reality.
    TechIMO.com Editor-in-Chief

  20. #20
    Indispensable Member surreal's Avatar
    Join Date
    Oct 2001
    Location
    Meechigan
    Posts
    30,891
    Well, it's not my cheesy internet connection after all... (noticed a lot more double posts-

    (btw if you post, and it just sits there, you can open a new window and the post is really there.)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. TIMO
    By J1mmy in forum Suggestion Box
    Replies: 0
    Last Post: December 10th, 2005, 11:46 PM
  2. timo.cz
    By sixf00t4 in forum IMO Community
    Replies: 7
    Last Post: February 26th, 2005, 08:06 AM
  3. [FAD] Client "stalling"
    By Eladijaz in forum Distributed Computing
    Replies: 5
    Last Post: October 5th, 2004, 03:52 PM
  4. Is TIMO Down?
    By Bill in SD, CA in forum General Tech Discussion
    Replies: 3
    Last Post: March 3rd, 2004, 10:30 PM
  5. Replies: 5
    Last Post: October 29th, 2003, 02:15 PM

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Recommended Sites: ResellerRatings Store Reviews