Hi, I need some urgent help with this situation I'm having.
I guess it's kinda my fault, ok I load raid setup utility (F10), and try to configure the array. I was messing around with it, easy as it seems. I did activate rebuild as well as deleting them (arrays). I set new arrays afterward which identical to what it was before.
So I reboot and the problem hits.
While it was detecting array...
a green window pops up with a decision:
" Clear Disk Data ? [Y]Yes [N]No. "
either I click yes or no.. it ends up loading only this message: " press f10 to enter Raid utility_ " and when I press f10, it won't respond at all. Anything else I'm trying to do won't respond. I couldn't even get onto BIOs because I probabbly had to bypass this in order to process further on. I tried many keys just to by pass this by no luck, only the restart command works (works before I chose to clear disk data y/n). I also tried loading in the raid driver disk and also the OS disk, but nothing respond. This problem basically similar to a blue screen of death.
in any case, is there a way to fix this ? I'm not sure resetting the mobo would do the trick. However I did unplug and replug the HDs but that didn't help at all. I'm near the end of the rope. =/
Mobo: K8N Neo2 Platinum
thanks
hardware
prices 
