BSOD in multiplayer games

[Forensick]

The Problem:
whenever i play multiplayer.... i BSOD after 5mins or so...
games it has happened in
WolfET
CoD
BF1942
BF2

all only in multiplayer... single is fine...

in an attempt to fix this, i have tried
using just one stick of RAM
changing graphics cards (from ATI radeon 9250, to nvidia 6600GT)
updating all drivers
reinstalling windows
screaming, crying, and begging.

none of this has worked....
i really dont know what to do

i dont know what infomation you want.... but here is basicly everything i could think of that you would want from sandra.

please help!




SiSoftware Sandra

Processor
Model : AMD Athlon(tm) 64 Processor 3200+
Speed : 2.01GHz
Model Number : 3200 (estimated)
Performance Rating : PR3015 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 1 Unit(s)
Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size

Mainboard
Bus(es) : AGP PCI USB FireWire/1394 i2c/SMBus
MP Support : 1 Processor(s)
MP APIC : No
System BIOS : Award Software International, Inc. F5
Mainboard : Gigabyte Technology Co., Ltd. nForce
Total Memory : 1GB DDR-SDRAM

Chipset 1
Model : Nvidia Corp nforce3 CPU to PCI Bridge
Front Side Bus Speed : 2x 1005MHz (2010MHz data rate)

Chipset 2
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Front Side Bus Speed : 2x 1005MHz (2010MHz data rate)
Total Memory : 1GB DDR-SDRAM
Memory Bus Speed : 2x 201MHz (402MHz data rate)

Video System
Monitor/Panel : Dell E770s
Adapter : NVIDIA GeForce 6600 GT

Power Management
AC Line Status : On-Line

Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)

Mainboard
Manufacturer : Gigabyte Technology Co., Ltd.
MP Support : 1 Processor(s)
MPS Version : 1.40
Model : nForce
Version : x.x
System BIOS : 12/21/2004-nForce-6A61CG0MC-00
Chipset : nVidia nForce3 ICP

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 1.5GB
Bank0/1 - A0 : None None None None DIMM 512MB
Bank2/3 - A1 : None None None None DIMM 512MB
Bank4/5 - ÃËh
: Empty

Chipset 1
Model : Nvidia Corp nforce3 CPU to PCI Bridge
Bus(es) : AGP PCI USB FireWire/1394 i2c/SMBus
Version : 1.03
Front Side Bus Speed : 2x 1005MHz (2010MHz data rate)
In/Out Width : 16-bit / 16-bit

Logical/Chipset 1 Memory Banks
Power Save Mode : No
Fixed Hole Present : No

Chipset 2
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Bus(es) : AGP PCI USB FireWire/1394 i2c/SMBus
Version : 1.02
Front Side Bus Speed : 2x 1005MHz (2010MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 1000MHz / 2x 200MHz
In/Out Width : 16-bit / 16-bit
IO Queue Depth : 8 request(s)

Chipset 2 Hub Interface
Type : HyperTransport
Version : 1.02
In/Out Width : 16-bit / 16-bit
Speed : 2x 1005MHz (2010MHz data rate)

Logical/Chipset 2 Memory Banks
Bank 0 : 512MB DDR-SDRAM 3.0-4-3-8 2CMD
Bank 1 : 512MB DDR-SDRAM 3.0-4-3-8 2CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 201MHz (402MHz data rate)
Multiplier : 1/10x
Width : 128-bit
Refresh Rate : 5.00µs
Power Save Mode : No
Fixed Hole Present : No

Memory Module 1
Manufacturer : MOSEL
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-3-3-8
Version : 1.1
Date of Manufacture : Saturday, December 25, 1999
Set Timing @ 200MHz : 3.0-3-3-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5

Memory Module 2
Manufacturer : MOSEL
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-3-3-8
Version : 1.1
Date of Manufacture : Saturday, December 25, 1999
Set Timing @ 200MHz : 3.0-3-3-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 25.0°C / 77.0°F
CPU Temperature : 30.0°C / 86.0°F

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 3375rpm

Voltage Sensor(s)
CPU Voltage : 1.42V
Aux Voltage : 2.62V
+3.3V Voltage : 3.33V
+5V Voltage : 2.80V
+12V Voltage : 11.67V
-12V Voltage : -3.47V
-5V Voltage : -0.93V
Standby Voltage : 3.41V
Battery Voltage : 4.08V

LPC Hub Controller 1
Model : Giga-Byte Technology nForce3 CPU to ISA Bridge

LPC Hub Controller 2
Model : Giga-Byte Technology nForce PCI SMB Controller

USB Controller 1
Model : Giga-Byte Technology nForce OHCI USB Controller
Version : 1.00
Interface : OHCI
Channels : 4
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : Giga-Byte Technology nForce OHCI USB Controller
Version : 1.00
Interface : OHCI
Channels : 4
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No



Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - None / PS/2
PS/2 Mouse - Detected : Mouse - PS/2 / PS/2
USB : USB - None / USB


SiSoftware Sandra

Processor
Model : AMD Athlon(tm) 64 Processor 3200+
Speed : 2.01GHz
Model Number : 3200 (estimated)
Performance Rating : PR3015 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 1 Unit(s)
Package : FC µPGA939
Multiplier : 10/1x
Minimum/Maximum Multiplier : 10/1x / 10/1x
Generation : G8
Name : M1F-DH Athlon 64 (K8 Winchester) 90nm 1.4-2.6GHz 1.45-1.55V
Revision/Stepping : 1F / 0 (10A)
Stepping Mask : DH-D0
Microcode : MU0FF041
Core Voltage Rating : 1.400V
Min/Max Core Voltage : 1.400V / 1.450V
Maximum Physical / Virtual Addressing : 40-bit / 48-bit
Native Page Size : 4kB

Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 1F / 0 (10A)

Processor Cache(s)
Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
Internal Instruction Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size
L2 Cache Multiplier : 1/1x (2010MHz)

Upgradeability
Socket/Slot : Socket 754
Upgrade Interface : Unknown
Supported Speed(s) : 3.20GHz+

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Power Rating(s)
CPU Core Power : 61W (estimated)
CPU Cooling System Thermal Resistance : 0.08°C/W (estimated)

Sensors
CPU Temperature : 30.0°C / 86.0°F
CPU Voltage : 1.46V

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange 8-bytes Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
PBE - Pending Break Enable : No
IA64 Technology : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
VMX - Virtual Machine eXtensions : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : No
CX16 - Compare & Exchange 16-bytes Instruction : No
xTPR - Send Task Priority Messages : No
DAZ - Denormals Are Zero : Yes

Extended Features
SYCR - Extended Fast System Call : Yes
EMMX - Extended MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
FXSR - Instructions Optimisation : Yes
3DNow! Technology : Yes
Extended 3DNow! Technology : Yes
XD/NX - No-execute Page Protection : Yes
AMD64/EM64T Technology : Yes
LAHF/SAHF - Support in 64-bit : Yes
CMP - Multi-Core Legacy Mode : No
SVM - Secure Virtual Machine : No

Power Management Features
STC - Software Thermal Control : No
TM - Thermal Monitor : No
TTP - Thermal Trip : Yes
VID - Voltage Control : Yes
FID - Frequency Control : Yes
TS - Thermal Sensor Built-in : Yes

Advanced Settings
System Ack Limit : 1 request(s)
System Victim Limit : 0 request(s)
Extended MTRR Types : Yes
I/O Type Range Registers : Yes
Top of Memory : 40000000 (1024MB)



Video Adapter
Model : NVIDIA GeForce 6600 GT
Chipset : GeForce 6600 GT
RAMDAC : Integrated RAMDAC
Video BIOS : Version 5.43.02.46.00
VGA Compatible : No
Total Memory : 256MB (244MB Video) (124MB System)
Texture Memory : 368MB
Supports DIME Texturing : Yes

AGP Capabilities
Version : 3.00
Command Queue Length : 32
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Data Transfer Modes Support : 1x 2x 4x
Current Data Transfer Rate : 4x

Video BIOS
Date of Manufacture : Tuesday, May 03, 2005
Version : 5.43.02.46.IP

Current Video Mode
Mode : 1024x768 16M+ TrueColour (32-bit)
Current Refresh Rate : 75Hz
Virtual Desktop Size : 1024x768

Video Driver
Model : nv4_mini.sys
Version : 6.14.10.7772
Expected Windows Version : 4.00
Video Acceleration : Yes
Screen Saver Active : 10 minutes(s)
Screen Saver Name : C:\WINDOWS\System32\logon.scr
Low Power Saving Active : 20 minutes(s)
Power Off Saving Active : 20 minutes(s)


Enhanced Video Settings
Animation Effects Enabled : Yes
Full Windows Drag Enabled : Yes
Font Smoothing Enabled : Yes
HighContrast Feature On : No

Device Mode Characteristics
Physical Medium Width : 320 mm, 13 in
Physical Medium Height : 240 mm, 9 in
Recommended CRT/Panel Size : 20 in
Horizontal/Vertical Resolution : 96x96 dpi
Colour Bits/Planes : 32 / 1 bit(s) pp
Brushes : 4294967295
Pens : 4294967295
Colours/Shades : 4294967295
Pixel Width/Height/Diagonal : 36 / 36 / 51

Driver Clipping Capabilities
Can Clip Output to Rectangle : Yes
Can Clip Output to Region : No

Driver Raster Capabilities
Supports Banding : No
Supports Fonts Larger than 64Kb : Yes
Can Transfer Bitmaps : Yes
Supports Bitmaps Larger than 64Kb : Yes
Supports Device Bitmaps : No
Supports DIBs : Yes
DIBs on Device Surface : Yes
Flood Fills : Yes
Supports Windows 2.x : Yes
Stretch/Compress Bitmaps : Yes
Stretch/Compress DIBs : Yes
Supports Scaling : No
Palette-Based Device : No
Saves Bitmap Locally : No


System Memory Summary
Total Physical Memory : 1GB
Free Physical Memory : 694MB, 68%
Maximum Page File : 2.4GB
Free Page File : 2.1GB, 89%
Page File : c:\pagefile.sys 1536 3072
PSE36 - 36-bit Page Size Extension : Yes
Maximum System Pages : 798720

Kernel Statistics
Total Processes : 47
Total Threads : 417
Total Open Handles : 9914

Kernel Memory Information
Total Memory : 55MB
Paged Memory : 41MB
Non-Paged Memory : 14MB

Page Commit Charge Statistics
Total Committed : 66673
Peak Commits : 107688
Maximum Commits : 629865

Extended Memory Information
Allocated Memory Load : 32%

[Friedchicken100]

Quote:

Voltage Sensor(s)
CPU Voltage : 1.42V
Aux Voltage : 2.62V
+3.3V Voltage : 3.33V
+5V Voltage : 2.80V
+12V Voltage : 11.67V
-12V Voltage : -3.47V
-5V Voltage : -0.93V
Standby Voltage : 3.41V
Battery Voltage : 4.08V

Your voltages are terrifying!

[Forensick]

that means?

and how would i fix

[Friedchicken100]

Your power supply is struggling to power you computer, it was poorly designed (generic cheapo brand), or it's about to kick the bucket.

[Forensick]

ummm.... its a coolmaster, and fairly new... (may this year)

[Friedchicken100]

I think those voltage readings have to be incorrect. Your computer would have had issues before.

What games DO work?

[Forensick]

all games work in singleplayer...
no games work in multiplayer

i have been trying to fix this for abut 3 months...
aside from that no other issues

[Friedchicken100]

I'm currently stumped.

I'll have to think about this one.

[Forensick]

thats like amazingly not good to hear....


tomorrow i am going to remove CPU clean it off, and put new thermal paste on and reseat.


and if that doesnt work, next pay i am buying new RAM....

by the time this is fixed my mobo will probably be the only thing left...

[DanU]

Even the best manufacturers can let a bad part slip through quality control. Regardless of what brand your PSU is, one thing that is clear is those voltages spell TROUBLE. I would try another monitoring program to verify that those are really your voltages, something like Motherboard Monitor, or you can go into the BIOS on some motherboards and check there as well. If the +5 really is that low, then you need to RMA that PSU.