Help

[James Malone1966]

I recently built a computer with ASUS STICKER II EXTREME mother board, Intel 3.2 CPU, 8800 GTS video cards, using a KOOLANCE Model: RP-1000 with a CPU-300-H06 Cooling Water Block and Koolance RAM-35 Memory Coolers. I can't run my computer for more than 4 minutes with out it heating up and setting off alarm at 55 degrees C. Any help will be appreciated.

[KarmaKiller]

Hi there, Welcome to TIMO.

Do you see H20 moving through the tubing? Is you pump properly powered and is it actually pumping?
When you mounted your block to the Mobo, did you use thermal paste? Did it look like it was seated correctly?
If you could provide some more info, it would be really helpful.
Good luck