February 21st, 2012, 07:35 AM #1
- Join Date
- Apr 2011
PC will boot up then monitor gets no signal?
I have a fairly old computer (packard bell) which I'm trying to get running for my friend but for some reason the PC starts up ok but after the windows loading screen it goes black and the monitor says "no input" i have tried the pc on a variety of different size monitors incase it was to do with the resolution but have no idea how to get it back.
Any ideas???? Thanks
February 21st, 2012, 07:58 AM #2
Try booting in safe mode.The propeller is just a big fan in front of the plane used to keep the pilot cool. When it stops, you can actually watch the pilot start sweating.
February 27th, 2012, 08:49 AM #3
- Join Date
- Feb 2012
This is RAM problem you have to remove and clean the root with soft cloth & agian try to start your PC. If it boot than ok.
But if not than some of your board chip is fused you need to contact the hardware technician.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Raim in forum Technical SupportReplies: 2Last Post: October 1st, 2009, 08:48 PM
By Alepale in forum Technical SupportReplies: 4Last Post: July 3rd, 2009, 10:09 PM
By GiganticDays in forum Technical SupportReplies: 1Last Post: December 22nd, 2008, 10:43 AM
By madgvr4 in forum General Tech DiscussionReplies: 10Last Post: January 11th, 2006, 10:48 PM
By v6killa in forum Technical SupportReplies: 1Last Post: November 27th, 2003, 02:20 PM