-
September 12th, 2012, 01:42 AM #1Junior Member
- Join Date
- Sep 2012
- Posts
- 4
usb device can perform faster if conected to usb 2.0 port.
I am using an assembled computer which was working fine till last weak , last weak when i pluged in my usb falsh drive a pop up appeared saying device ca perform faster if connected to usb 2.0 port,
and hence the speed of read write of usb declined significantly.
I am quiet sure all my ports and devices are usb 2.0, as they were working fine till last weak .
Tried updating drivers it shows" driver up to date" .
uninstalled an installed them again still no improvement.
please help me..........
-
September 12th, 2012, 04:27 AM #2
How old is the flash drive?
Do you have another PC to test it on?Imagine a world where dogs took bad owners to the pound...
-
September 12th, 2012, 10:53 AM #3Junior Member
- Join Date
- Sep 2012
- Posts
- 4
its not the problem with a single flash drive it shows same message for every usb memory device plugged in..
and all those devices work fine on other systems i have checked that already...
so i guess its not the problem with the flash drive.....
-
September 12th, 2012, 11:41 AM #4
When you look in device manager do you see an "enhanced" controller?
Imagine a world where dogs took bad owners to the pound...
-
September 12th, 2012, 01:28 PM #5Junior Member
- Join Date
- Sep 2012
- Posts
- 4
no there is no enhanced usb controller........
can you where can i find it and how to install it.....
because i already updated my windows 7 but that did't helped....
-
September 12th, 2012, 02:49 PM #6
If you see "enhanced" controller" in device manager under USB devices then you have USB 2.0.
-
September 12th, 2012, 03:03 PM #7
You have to get the drivers from the who ever made the mobo... If the pc is a Dell or HP type pc you'd get the drivers from them.
Imagine a world where dogs took bad owners to the pound...
-
September 13th, 2012, 12:07 AM #8Junior Member
- Join Date
- Sep 2012
- Posts
- 4
thanks a lot steve for your help one last question to bother you.......

as you told me i tried to update my drivers using "easy drive " software as my computer is an assembled one...
it did showed enhanced usb 2.0 usb host controller outdated but when i tried to update it it showed me "device unplugged" and i am not sure what does that mean as i had already plugged my usb flash drive.......
also tried doing same using other softwares they also showed same message "device unplugged..............????????Last edited by sumit22; September 13th, 2012 at 01:32 AM.
-
September 13th, 2012, 03:38 AM #9
I've never seen that message - but if you'll Google-> device unplugged
You'll find plenty to read and probably find a solution.Imagine a world where dogs took bad owners to the pound...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
USB error: This device can perform faster...
By MTAtech in forum Technical SupportReplies: 30Last Post: July 31st, 2011, 06:42 AM -
USB device perform faster
By atthev in forum Technical SupportReplies: 6Last Post: November 24th, 2010, 08:55 PM -
120G External Drive, USB 2.0: Works on USB ports, not on USB 2.0 PCMCIA Buscard port
By FHamilton58 in forum Storage RelatedReplies: 3Last Post: July 29th, 2010, 08:12 PM -
This device could perform faster message!
By drummerboy in forum Applications and Operating SystemsReplies: 8Last Post: July 18th, 2008, 09:52 AM



LinkBack URL
About LinkBacks



Reply With Quote




Best wishes for your wife, TP. I hope it all turns out OK.
Is It Just Me? v233893843