Some Improvement on Temp of CPU!

bad1550 · January 17th, 2003, 10:15 AM

My system is a 2.0 Celeron.

I was getting a CPU temp of 69 degrees. (The fan speed was 2,500 RPM)

I exchanged my CPU fan and the reading now is 3,200 RPM.

I added a Fan for Intake (bottom of case) and a fan for exhaust (back of case) and my CPU temp is running a constant 48 degrees.

I still get freezups when encoding video!

Is this acceptable?

Bob

thekemp · January 17th, 2003, 11:36 AM

it will not be temperature problem as the celeron is designed to throttle down to a lower speed when it over heats. the threshold for the cpu is 70 deg c before the chip with clock to a lower speed. i would suspect that your system may have another fault if it is freezing. what chipset does it have if you can give us your system specs and software you are using.

regards

bad1550 · January 17th, 2003, 11:38 AM

It is a Via chipset with 512 DDR Pc2100

16 Meg PCI video

60 meg hd

Sonic MyDVD software

thekemp · January 17th, 2003, 11:41 AM

tried updating your via 4 in 1 drivers?
i use the sonic my dvd software and i find it stable

the hyperion drivers for your chipset may help it a little imo

www.viatech.com

but..... i have never found the p4x266 chipset you have the MOST stable in the world!

bad1550 · January 17th, 2003, 11:51 AM

Thanks!

I will try it!

Bob

bhess · January 17th, 2003, 07:00 PM

What are you using? TMPGEnc?

bad1550 · January 20th, 2003, 09:46 AM

I am using Sonic MyDVD!

bhess · January 20th, 2003, 12:26 PM

OK I'm not familar with that, but TMPGEnc has some issues like that. Sorry I can't help with that one.